What is a transfer switch, and do I need an automatic one?

A transfer switch isolates your home's electrical panel from the utility grid the moment the generator kicks on, so power never backfeeds into the lines. An automatic transfer switch senses the outage and starts the generator within seconds, while a manual switch requires you to start the unit and flip the switch by hand. For Glens Falls homes with older 100-amp panels, we confirm that the transfer switch is rated correctly before installation, since an undersized switch can trip under full load.

How does the permit process work for generator installation in Glens Falls?

This kind of electrical work in Warren County often needs a permit and inspection, depending on the scope of electrical and gas line work involved. We can walk you through what your project might require. New York's Uniform Fire Prevention and Building Code applies to standby generators statewide, so the exact permit process depends on your municipality and the size of the unit. Glens Falls homeowners should ask about permit requirements before settling on a generator size or fuel type.

What other electrical services does Mr. Electric offer?

Beyond generator installation, our team handles panel upgrades, outlet installation, and EV charger installation for homeowners switching to electric vehicles. We also handle LED lighting installation to cut energy use throughout the house, plus pool and spa wiring for hot tubs and pools that need dedicated circuits to meet code. If your project touches more than one of these services, such as a panel upgrade alongside your new generator, we can scope both at once so you are not paying for two separate visits.

Can a portable generator handle a whole Glens Falls house during an outage?

A portable generator can select circuits like a refrigerator, a few lights, and a sump pump. Still, it can't carry a whole-home electrical panel the way a stationary standby unit can. Portable units also need manual refueling every 8 to 12 hours, which is hard to manage during an overnight outage in freezing Glens Falls weather. If you want your furnace, well pump, sump pump, and food storage covered automatically, a stationary generator with an automatic transfer switch is the more dependable option.

What size generator do I need for my Glens Falls home?

Generator capacity depends on which circuits you want to run: a 10-14 kW standby unit covers essential loads like heat, refrigeration, and a sump pump, while whole-home coverage for a larger Glens Falls property often requires 20 kW or more. Warren County saw between 10,000 and 16,000 customers lose power during a single spring storm in 2022, according to the New York Governor's Office, so undersizing the system leaves you short when outages stretch into days. Homes near the Hudson River in Glens Falls often run a well pump and a sump pump together, which raises the required capacity beyond that of a typical suburban lot.

Ready to schedule generator installation in Glens Falls, NY?

Mr. Electric of Queensbury installs, connects, and tests backup generators for homes throughout Glens Falls and the surrounding Warren County towns, along with panel upgrades, EV charger installation, and other electrical work your home may need. Our team walks you through generator sizing, fuel options, and transfer switch setup before installation day, so nothing catches you off guard. Contact us today to schedule a visit and get a clear, upfront quote for your new backup generator. From circuit breaker replacement to panel upgrades and outlet installation , we’ve got you covered.

Generator Installation Glens Falls, NY

Backup Power That Keeps Your Home Running

A power outage from a winter storm can leave your Glens Falls home dark for days, and Warren County sees more than its share of downed lines every year. Losing power means the furnace, well pump, and refrigerator all go quiet at once. A properly sized home generator keeps your household running through the outage instead of waiting it out in the cold. Mr. Electric of Queensbury handles generator installations across the region, from natural-gas standby units to portable-ready hookups for shorter outages. As your local Glens Falls electrician, we size the system to your panel, your fuel source, and the circuits that matter most in your home.

Backup Power That Keeps Your Home Running

Residential
Commercial

Book Online

First Name*

Last Name*

Email*

Phone Number*

Street Address**

ZIP/Postal Code*

Yes! You can text me service reminders and other messages.

By checking this box, I agree to opt in to receive automated informational and promotional SMS and/or MMS messages from Mr. Electric, a Neighborly company, and its franchisees to the provided mobile number(s). Messages & data rates may apply. Message frequency varies. View Terms and Privacy Policy. Reply STOP to opt out of future messages. Reply HELP for help.

By entering your email address, you agree to receive emails about services, updates or promotions, and you agree to the Terms and Privacy Policy. You may unsubscribe at any time.

How Generator Installation Works in Glens Falls, NY

Every installation starts with a load calculation that maps which circuits need power when the grid goes down: heat, well pump, sump pump, refrigerator, and medical equipment top the list for most Glens Falls homes. From there, our Queensbury electrician team checks your electrical panel. We work with 100-amp and 200-amp panels, and the panel size determines which generator capacity is right for your home. Standby models run on natural gas or propane via a dedicated fuel line, while portable generators require a manual switch and sufficient fuel storage to last through extreme weather. We set the unit on leveling pads, wire in the transfer switch, and confirm the generator communicates with your panel before we call the job done.

Why Glens Falls Homeowners Choose Mr. Electric

Mr. Electric of Queensbury has worked on homes throughout Warren County for 15 years, with crews who know the difference between a Glens Falls colonial built in the 1950s and a newer build near Lake George or Bolton Landing. We quote every generator project by the job, not the hour, so you know the total cost before work begins. The Neighborly Done Right Promise^® backs every project: if something isn't right, we make it right. Storms in this region don't wait for business hours, and our 24/7 emergency service means a downed line or dead panel doesn't turn into a multi-day wait. We also serve Chestertown and the surrounding towns of Warren County, so your generator gets the same attention whether you live in the city of Glens Falls or just outside it.

94 Big Boom Rd Queensbury, NY 12804, USA

Service We Provide

Residential
Commercial

Frequently Asked Questions About Generator Installation in Glens Falls, NY

Generator capacity depends on which circuits you want to run: a 10-14 kW standby unit covers essential loads like heat, refrigeration, and a sump pump, while whole-home coverage for a larger Glens Falls property often requires 20 kW or more. Warren County saw between 10,000 and 16,000 customers lose power during a single spring storm in 2022, according to the New York Governor's Office, so undersizing the system leaves you short when outages stretch into days. Homes near the Hudson River in Glens Falls often run a well pump and a sump pump together, which raises the required capacity beyond that of a typical suburban lot.
A transfer switch isolates your home's electrical panel from the utility grid the moment the generator kicks on, so power never backfeeds into the lines. An automatic transfer switch senses the outage and starts the generator within seconds, while a manual switch requires you to start the unit and flip the switch by hand. For Glens Falls homes with older 100-amp panels, we confirm that the transfer switch is rated correctly before installation, since an undersized switch can trip under full load.
This kind of electrical work in Warren County often needs a permit and inspection, depending on the scope of electrical and gas line work involved. We can walk you through what your project might require. New York's Uniform Fire Prevention and Building Code applies to standby generators statewide, so the exact permit process depends on your municipality and the size of the unit. Glens Falls homeowners should ask about permit requirements before settling on a generator size or fuel type.
Beyond generator installation, our team handles panel upgrades, outlet installation, and EV charger installation for homeowners switching to electric vehicles. We also handle LED lighting installation to cut energy use throughout the house, plus pool and spa wiring for hot tubs and pools that need dedicated circuits to meet code. If your project touches more than one of these services, such as a panel upgrade alongside your new generator, we can scope both at once so you are not paying for two separate visits.
A portable generator can select circuits like a refrigerator, a few lights, and a sump pump. Still, it can't carry a whole-home electrical panel the way a stationary standby unit can. Portable units also need manual refueling every 8 to 12 hours, which is hard to manage during an overnight outage in freezing Glens Falls weather. If you want your furnace, well pump, sump pump, and food storage covered automatically, a stationary generator with an automatic transfer switch is the more dependable option.
Mr. Electric of Queensbury installs, connects, and tests backup generators for homes throughout Glens Falls and the surrounding Warren County towns, along with panel upgrades, EV charger installation, and other electrical work your home may need. Our team walks you through generator sizing, fuel options, and transfer switch setup before installation day, so nothing catches you off guard. Contact us today to schedule a visit and get a clear, upfront quote for your new backup generator. From circuit breaker replacement to panel upgrades and outlet installation, we’ve got you covered.