How does a whole-house surge protector work?

A whole-house surge protector installs directly at your main panel, using internal components called metal oxide varistors to divert extra voltage away from your wiring the moment a spike hits. Standard power strips only shield whatever happens to be plugged into them, but a panel-mounted unit protects every circuit in the building, including hardwired equipment like your HVAC unit, water heater, and kitchen appliances. In Moore, that protection is critical during spring and summer lightning storms. Utility line strikes generate voltage spikes that move far too fast for a standard circuit breaker to trip. Once the unit channels that extra power into the ground, it instantly resets itself, keeping your home guarded without you ever having to check the box.

What's the difference between Type 1, Type 2, and Type 3 protection?

Type 1 surge protective devices are installed on the utility side of your meter, Type 2 devices mount inside or beside your main panel, and Type 3 devices are the plug-in strips you use at individual outlets. Most Moore homes benefit from a layered approach: Type 2 protection at the panel handles large surges from lightning strikes or grid switching. In contrast, Type 3 strips add a second layer for sensitive electronics like gaming consoles and home theater equipment. Combining both catches surges that either device alone might miss, since panel-level protection reacts to whole-house spikes and point-of-use strips absorb smaller, localized ones.

Can a power surge damage my HVAC system or EV charger?

Yes. HVAC boards and EV charger circuit boards contain sensitive electronic components that fail quickly under repeated voltage spikes, even small ones that never trip a breaker. Moore's summer storms and occasional utility grid switching send these smaller surges through home wiring more often than most homeowners realize. Over time, unprotected circuit boards degrade, leading to costly repairs or full equipment replacement. A panel-mounted surge protective device stops this gradual damage by catching spikes before they reach the HVAC unit, EV charger , or any dedicated circuit installation feeding major appliances.

Do I need a dedicated circuit for my surge protector?

Most whole-house surge protectors tie directly into breaker space at your main electrical panel rather than requiring a separate dedicated circuit installation. During the inspection, we check available breaker space, panel age, and grounding integrity to confirm the device fits safely. If your panel's already full or shows signs of faulty wiring, we may recommend a subpanel or panel upgrade first, since surge protection performs best on a panel that meets current National Electrical Code standards.

What other services does Mr. Electric offer in Moore?

Beyond surge protection, we handle electrical panel repair , EV charger installation , home rewiring , and lighting installation for homes throughout Moore. Panel repair and upgrades often go hand in hand with surge protection, since an outdated electrical service panel may lack the breaker space or grounding integrity a modern surge protective device needs. EV charger installation benefits from the same panel-level protection, since chargers carry sensitive circuit boards that voltage spikes can damage. Home rewiring addresses faulty wiring in older houses, while lighting installation projects, including LED lighting upgrades, pair naturally with a panel inspection. Ask your electrician about combining any of these projects during a single visit to save time.

Does insurance cover surge damage in Moore, OK?

Insurance coverage for surge damage varies by policy and provider, so homeowners should review their homeowner's policy or ask their agent directly rather than assume automatic coverage. Some insurers require documented surge protection as a condition of coverage, or offer reduced premiums when a whole-house system is installed. Since Moore sees frequent lightning storms and service outages tied to grid switching, having a panel-mounted surge protective device on record can strengthen a claim if surge damage does occur. We can provide installation documentation for insurance purposes upon request.

How do I schedule whole-house surge protector installation in Moore?

Scheduling starts with a panel inspection so we can confirm breaker space, panel age, and grounding integrity before recommending a surge protective device. Our electricians serve Moore and the surrounding Oklahoma City metro area, matching the device to your home's electrical panel and load. Schedule an appointment today , and we'll walk you through the process, from panel evaluation to final testing of your new whole-home surge protection system.

How does a whole-house surge protector work?

A whole-house surge protector installs directly at your main panel, using internal components called metal oxide varistors to divert extra voltage away from your wiring the moment a spike hits. Standard power strips only shield whatever happens to be plugged into them, but a panel-mounted unit protects every circuit in the building, including hardwired equipment like your HVAC unit, water heater, and kitchen appliances. In Moore, that protection is critical during spring and summer lightning storms. Utility line strikes generate voltage spikes that move far too fast for a standard circuit breaker to trip. Once the unit channels that extra power into the ground, it instantly resets itself, keeping your home guarded without you ever having to check the box.

Whole House Surge Protector Installation Moore, OK

Moore sits along Oklahoma's spring storm line, and a single lightning strike near the grid can push a power surge through your main panel before the breaker even trips. We don't just sell a box for the wall; Mr. Electric of Oklahoma City installs whole-house surge protection sized to your service, giving Moore electrician clients layered defense for HVAC systems, EV chargers, and other sensitive electronics. Call us today to get started on your whole house surge protector installation in Moore, OK.

Residential
Commercial

Book Online

First Name*

Last Name*

Email*

Phone Number*

Street Address**

ZIP/Postal Code*

Yes! You can text me service reminders and other messages.

By checking this box, I agree to opt in to receive automated informational and promotional SMS and/or MMS messages from Mr. Electric, a Neighborly company, and its franchisees to the provided mobile number(s). Messages & data rates may apply. Message frequency varies. View Terms and Privacy Policy. Reply STOP to opt out of future messages. Reply HELP for help.

By entering your email address, you agree to receive emails about services, updates or promotions, and you agree to the Terms and Privacy Policy. You may unsubscribe at any time.

How Whole-House Surge Protection Stops Damage

An Oklahoma City electrician from our team mounts a surge protective device directly at your main electrical panel, where metal oxide varistors divert excess voltage to the ground before it reaches your circuits. This differs from point-of-use surge strips, which only guard whatever's plugged into them. Type 1 protection sits outside at the meter. Type 2 goes right in your breaker box. Type 3 is just the surge strip behind your TV. Putting a Type 2 in the panel and plugging your expensive gear into Type 3 strips gives you the best setup.

First, we check your box for open space, good grounding, and load limit. If your panel is older, we might have to swap a breaker or add a small subpanel to wire it in safely. Once it’s hooked up, it runs 24/7, so when lightning hits nearby or the grid bounces, it eats the spike and you don't have to go reset anything.

Why Choose Us For Whole House Surge Protector Installation in Moore?

Moore homeowners deal with more lightning storms and grid switching than most Oklahoma cities, and fallen trees or utility work can send a fast power spike down the line during recovery. Homes built before the 1990s often carry panels that weren't sized for today's electrical load. This means EV chargers, smart thermostats, security systems, and networking equipment all draw through wiring that predates modern surge protection standards. We serve homeowners across Midwest City, Del City, and El Reno with the same panel-level protection, matched to each home's electrical service and code requirements. Ready to stop worrying about the next storm? Contact us today to get your panel evaluated.

5708 NW 132nd St Ste H Oklahoma City, OK 73142, United States

Services We Provide

Residential
Commercial

Frequently Asked Questions About Whole-House Surge Protection in Moore, OK

A whole-house surge protector installs directly at your main panel, using internal components called metal oxide varistors to divert extra voltage away from your wiring the moment a spike hits. Standard power strips only shield whatever happens to be plugged into them, but a panel-mounted unit protects every circuit in the building, including hardwired equipment like your HVAC unit, water heater, and kitchen appliances. In Moore, that protection is critical during spring and summer lightning storms. Utility line strikes generate voltage spikes that move far too fast for a standard circuit breaker to trip. Once the unit channels that extra power into the ground, it instantly resets itself, keeping your home guarded without you ever having to check the box.
Type 1 surge protective devices are installed on the utility side of your meter, Type 2 devices mount inside or beside your main panel, and Type 3 devices are the plug-in strips you use at individual outlets. Most Moore homes benefit from a layered approach: Type 2 protection at the panel handles large surges from lightning strikes or grid switching. In contrast, Type 3 strips add a second layer for sensitive electronics like gaming consoles and home theater equipment. Combining both catches surges that either device alone might miss, since panel-level protection reacts to whole-house spikes and point-of-use strips absorb smaller, localized ones.
Yes. HVAC boards and EV charger circuit boards contain sensitive electronic components that fail quickly under repeated voltage spikes, even small ones that never trip a breaker. Moore's summer storms and occasional utility grid switching send these smaller surges through home wiring more often than most homeowners realize. Over time, unprotected circuit boards degrade, leading to costly repairs or full equipment replacement. A panel-mounted surge protective device stops this gradual damage by catching spikes before they reach the HVAC unit, EV charger, or any dedicated circuit installation feeding major appliances.
Most whole-house surge protectors tie directly into breaker space at your main electrical panel rather than requiring a separate dedicated circuit installation. During the inspection, we check available breaker space, panel age, and grounding integrity to confirm the device fits safely. If your panel's already full or shows signs of faulty wiring, we may recommend a subpanel or panel upgrade first, since surge protection performs best on a panel that meets current National Electrical Code standards.
Beyond surge protection, we handle electrical panel repair, EV charger installation, home rewiring, and lighting installation for homes throughout Moore. Panel repair and upgrades often go hand in hand with surge protection, since an outdated electrical service panel may lack the breaker space or grounding integrity a modern surge protective device needs. EV charger installation benefits from the same panel-level protection, since chargers carry sensitive circuit boards that voltage spikes can damage. Home rewiring addresses faulty wiring in older houses, while lighting installation projects, including LED lighting upgrades, pair naturally with a panel inspection. Ask your electrician about combining any of these projects during a single visit to save time.
Insurance coverage for surge damage varies by policy and provider, so homeowners should review their homeowner's policy or ask their agent directly rather than assume automatic coverage. Some insurers require documented surge protection as a condition of coverage, or offer reduced premiums when a whole-house system is installed. Since Moore sees frequent lightning storms and service outages tied to grid switching, having a panel-mounted surge protective device on record can strengthen a claim if surge damage does occur. We can provide installation documentation for insurance purposes upon request.
Scheduling starts with a panel inspection so we can confirm breaker space, panel age, and grounding integrity before recommending a surge protective device. Our electricians serve Moore and the surrounding Oklahoma City metro area, matching the device to your home's electrical panel and load. Schedule an appointment today, and we'll walk you through the process, from panel evaluation to final testing of your new whole-home surge protection system.

Residential & Commercial Services

Residential
Commercial