Electrician in Langford, BC

A Level 2 EV charging station runs on a dedicated 240-volt, 40-amp to 50-amp circuit. It charges most electric vehicles 5 to 7 times faster than a standard 120-volt Level 1 outlet. If you recently bought an EV and are relying on the included Level 1 cord, you already know the limitation.

Our electricians assess your panel capacity before installation. If your panel does not have room for a dedicated 40-amp or 50-amp circuit breaker, we will discuss a panel upgrade at the same time. We pull the required Technical Safety BC permit, install the circuit and charger mount, and complete the inspection. BC Hydro offers rebates on Level 2 electric vehicle charging station installations for eligible BC property owners. We provide the documentation you need to apply.

A dead outlet is not always a tripped breaker. Outlets fail from loose wiring connections, worn contacts, or overloaded circuits. In older Langford homes, aluminum wiring adds another layer of complexity. Aluminum and standard copper outlets react differently over time and create a fire risk at the connection point.

We test the outlet, trace the circuit, and identify the root cause before replacing anything. If your home has aluminum wiring, we use CO/ALR-rated outlets and switches rated for aluminum connections, as required by the BC Electrical Code.

Common outlet issues we see in Langford:

• Dead outlets not caused by a tripped breaker
• Outlets that feel warm or make a buzzing sound
• Two-prong ungrounded outlets in older homes
• GFCI outlets that will not reset
• Outlets with scorch marks or discoloration

Homes built in Langford between approximately 1965 and 1976 often have aluminum branch circuit wiring. Aluminum wiring is not automatically dangerous, but it requires specific devices and connection methods to remain safe. Standard copper-rated outlets and switches are not compatible.

We perform a full electrical assessment of your home's wiring. Depending on what we find, remediation options range from replacing outlets and switches with CO/ALR-rated devices to installing AlumiConn connectors at each connection point, or a full rewiring with copper wire. We document our findings and walk you through the recommended scope before any work begins.

Switching from incandescent or fluorescent fixtures to LED reduces energy consumption by 60 to 80 percent per fixture. For a home with 30 pot lights, that difference adds up on every BC Hydro bill.

LED retrofitting is not always plug-and-play. Older fixtures are sometimes incompatible with LED drivers, and some dimmer switches cause flickering or buzzing with LED bulbs. We assess your fixtures, replace incompatible components, and install LED-compatible dimmers where needed. We also handle full lighting installation for kitchen renovations, bathroom upgrades, and new construction.

Outdoor electrical work in Langford requires weatherproof fixtures, GFCI-protected circuits, and proper burial depth for underground conduit. We install exterior pot lights, pathway lighting, security lighting, and permanent architectural lighting systems, including Gemstone Lights.

Gemstone Lights are a permanent LED lighting system installed in your roofline. They replace seasonal string lights and are controlled by an app. You set the colour, schedule, and pattern from your phone. The fixtures stay year-round and withstand the coastal BC climate.

A hot tub requires a dedicated 240-volt, 50-amp to 60-amp circuit with a 4-wire connection and a disconnect box installed within sight of the tub, but no closer than 1.5 metres. This is a BC Electrical Code requirement.

We pull the permit, run the circuit from your panel, install the disconnect, and connect to the spa's load centre. The job typically takes one day for a straightforward installation where the panel has capacity. If a panel upgrade is needed first, we schedule both together.

A kitchen renovation almost always involves electrical upgrades. Counter circuits in BC require a minimum of two dedicated 20-amp small appliance circuits. Ranges require a dedicated 240-volt, 40-amp to 50-amp circuit. Dishwashers, microwaves, and refrigerators each need their own circuits in modern kitchens.

We work alongside your renovation contractor to rough-in new circuits, relocate outlets, install under-cabinet lighting, and connect appliances once the renovation is complete. We coordinate the permit and inspection timeline with your project schedule.

A whole-home surge protector installs at your electrical panel and protects every device in your home from voltage spikes. A single power surge from a lightning strike or a BC Hydro grid fluctuation destroys electronics, appliances, and HVAC equipment in seconds.

Point-of-use power bars protect only what is plugged into them and offer limited joule ratings, typically 1,000 to 2,000 joules. A whole-home surge protector rated at 40,000 amps of surge current provides protection at the source. We install whole-home surge protection as a standalone service or alongside any panel work.

New construction in Langford's Westhills and Bear Mountain developments requires a full electrical rough-in, panel installation, and final inspection before BC Hydro connects service. We work with builders and general contractors from the framing stage through to the final walkthrough.

Our scope of new builds includes service entrance installation, panel sizing, circuit layout, rough-in wiring, device installation, and coordination of all Technical Safety BC inspections. We provide a quote by scope, not by the hour.

Mr. Electric of Victoria serves commercial properties in Langford, including retail, office, and light industrial spaces. Our commercial electrical services include panel installation and upgrades, lighting maintenance, electrical assessments, tenant improvement wiring, and circuit additions for new equipment.

All commercial electrical work in BC requires a licensed electrical contractor with an FSR on file. We handle the permit process and coordinate inspections with Technical Safety BC.

A whole-home electrical assessment covers your panel, wiring, outlets, switches, and fixtures. Our electrician inspects your panel for capacity, checks for signs of overloading or outdated components, tests outlets for proper grounding and GFCI protection, and identifies any code deficiencies. You receive a written summary of findings and a quote for any recommended work. Most assessments take two to three hours, depending on the size of your home.

The clearest signs are repeated breaker trips on the same circuit, flickering lights when a large appliance starts, warm or discoloured outlets, and a panel with physical fuses instead of breakers. Homes in Langford built before 1970 often have 60-amp or 100-amp service, which is not adequate for today's electrical loads. Adding an EV charging station, a heat pump, or a hot tub to an already-loaded 100-amp panel trips breakers regularly and creates a fire risk over time. A 200-amp panel upgrade resolves the capacity issue and gives you room for future additions.

A Level 1 charger uses a standard 120-volt outlet and adds roughly 6 to 8 kilometres of range per hour of charging. A Level 2 EV charging station runs on a 240-volt dedicated circuit and adds 30 to 50 kilometres of range per hour. For most EV owners in Langford, a Level 2 station installed in the garage is the practical choice. It requires a dedicated 40-amp or 50-amp circuit and a Technical Safety BC permit. BC Hydro offers rebates for eligible Level 2 installations.

Yes. Any EV charging station installation in Langford requires an electrical safety permit from Technical Safety BC. The permit ensures the circuit is properly sized, the installation is inspected, and your home insurance remains valid. Our electricians pull the permit, complete the installation, and arrange the inspection. You do not need to manage the permit process yourself.

The most reliable way to check is to look at your panel. Aluminum branch circuit wiring is often labelled "AL" on the wire insulation or the panel directory. Homes built in Langford between 1965 and 1976 are the most likely candidates. If you are unsure, our electricians will inspect your panel and a sample of outlets to confirm the wiring type. Do not open your panel yourself. That is a job for a licensed electrician.

In British Columbia, most electrical work beyond simple fixture replacements requires a permit from Technical Safety BC. This includes panel upgrades, new circuit installations, EV charging station installations, hot tub wiring, new construction rough-ins, and any work on your service entrance. Unpermitted electrical work creates liability issues when you sell your home and voids your home insurance coverage for related claims. We pull permits for all applicable work as a standard part of our process.

Most residential panel upgrades in Langford take one full day. The process involves a BC Hydro disconnect in the morning, panel removal and replacement, reconnection of all circuits, and a final inspection by Technical Safety BC. BC Hydro reconnects your power after the inspection passes. You are without power for approximately four to six hours during work. We schedule everything and confirm the timeline with you before the job starts.

Yes. In British Columbia, all electrical work must be performed by a Technical Safety BC-licensed electrical contractor with a designated Field Safety Representative (FSR). The FSR is responsible for the quality and code compliance of all work performed. You verify any electrical contractor's license using the "Find a Licensed Contractor" tool on the Technical Safety BC website. Every electrician on our team holds the required credentials. We encourage you to check.

Yes. Electrical troubleshooting is one of the most common calls we get in Langford. Symptoms like flickering lights, warm outlets, tripping breakers, or a burning smell without a visible source all point to an underlying electrical problem that needs a trained eye. Our electricians use circuit testing equipment to trace faults, identify loose connections, and locate overloaded circuits before they become a safety issue. We diagnose first and quote before we do any repair work.

Yes. Mr. Electric of Victoria provides commercial electrical services in Langford for retail, office, and light industrial properties. Our commercial work includes panel upgrades, circuit additions, lighting maintenance, electrical assessments, and tenant improvement wiring. All commercial electrical projects are completed by licensed electricians under a valid Technical Safety BC permit.

Contact Mr. Electric of Victoria by phone or through our online booking form. We schedule a visit, assess your electrical project on-site, and provide a written quote before any work begins. You get a price by the job, not by the hour. There are no surprise charges after the fact. Every job is backed by the Neighborly Done Right Promise: if the work is not done right, we make it right.

We serve Langford, Bear Mountain, Westhills, Langford City Centre, and surrounding communities, including Duncan and Saanich. Contact us today to book your services.