Skip to Main Content Skip to Footer Content

Mr. Electric of Tampa Bay Blog

none Electrical Safety

Electrical Rewiring Scope by Home Type in Tampa Bay

The scope of a rewire depends on how the building was built. A Hyde Park bungalow with knob-and-tube usually needs a whole-home rewire and service upgrade. A 1960s concrete block ranch in Palma Ceia often needs aluminum remediation or partial rewiring routed through the attic. A waterfront home needs corrosion-driven exterior and dock circuits replaced. A commercial space is rewired in phases around business hours. Whole-home residential rewires in Tampa Bay typically run $8,750–$14,800 for a 2,000 sq ft home.

"Do I need to rewire?" is the first question. The second, and the one that decides your budget and timeline, is "what does the rewire actually involve for my building?" A rewire in a raised-floor 1925 bungalow is a different project from a rewire in a slab-on-grade block home with terrazzo floors, and both are different again from rewiring a restaurant that has to reopen by Friday.

Mr. Electric of Tampa Bay has rewired homes and commercial spaces across Hillsborough and Pinellas Counties since 1994 (License EC13015799). This guide breaks down what a rewire usually includes for each common building type in our market so you can read a quote with confidence. Every rewiring project is backed by a one-year parts and labor warranty, and rewiring evaluations are typically available the same week you call. For warning signs and general rewiring costs, start with our Residential Rewiring in Tampa Bay guide.

Rewiring Scope at a Glance

Building type

Typical neighborhoods

Usual scope

Typical timeline

Pre-1950 historic (knob-and-tube)

Hyde Park, Seminole Heights, Tampa Heights, Old Northeast, Kenwood

Whole-home rewire, service upgrade, grounding, AFCI/GFCI

5–7 working days plus inspection

1950s–1970s block ranch (cloth or aluminum)

Palma Ceia, Carrollwood, Town 'n' Country, Temple Terrace, Shore Acres

Aluminum remediation or partial rewire; whole-home when wiring is systemically degraded

1–3 days partial; 3–7 days whole-home

Waterfront

Davis Islands, Snell Isle, Belleair, Apollo Beach, Culbreath Isles

Exterior, service entrance, and dock circuits; post-flood replacement

1–4 days, depending on dock and flood exposure

Gut remodel or addition

South Tampa, Seminole Heights, Old Northeast

Open-wall rewire to current code, new kitchen and bath circuits, load calculation

Follows the renovation schedule

Modern (1990s+)

Westchase, Tampa Palms, New Tampa, FishHawk

Targeted circuits: EV, pool heat pump, battery or generator, subpanels

1–2 days

Commercial

Westshore, Hyde Park Village, SoHo, downtown St. Petersburg, Benjamin Rd and airport-area flex space

Tenant improvement or phased building rewire, panelboards, lighting and controls

Phased, often nights and weekends

Typical patterns, not rules. Additions, past renovations, and access change scope house by house. Final scope is set after an on-site evaluation.

Pre-1950 Historic Homes: Hyde Park, Seminole Heights, Tampa Heights and Old Northeast

Typical scope: Whole-home rewire. Knob-and-tube and early cloth-sheathed circuits are replaced with grounded copper, the 60- or 100-amp service is usually upgraded to 200 amps, and AFCI and GFCI protection is added to current code. Raised floors and attics make these homes easier to rewire than most people expect.

The bungalows and four-squares in Hyde Park, Seminole Heights, and Tampa Heights, and the 1920s homes of St. Petersburg's Old Northeast and Kenwood, are Tampa Bay's most common whole-home rewire candidates. Knob-and-tube wiring was not designed for modern loads or for contact with insulation, and many insurers will not write a policy on a home where it is still active.

What the scope usually includes

  • New grounded copper branch circuits throughout, with knob-and-tube disconnected and abandoned in place or removed where accessible.

  • Service upgrade from 60 or 100 amps to 200 amps, with a new panel. A standard 200-amp panel upgrade typically runs $3,000–$5,000 when added to the scope.

  • Grounding electrode system brought to current code, plus whole-home surge protection under NEC 230.67.

  • AFCI protection (NEC 210.12) on living-area and bedroom circuits, and GFCI protection (NEC 210.8) in kitchens, baths, laundry, garage, and outdoors.

  • Kitchen and bath circuits brought to current requirements, including the two 20-amp small-appliance circuits for kitchen countertops.

What makes these homes easier, and harder

Many older Tampa bungalows sit on raised pier foundations, so a crawlspace below and an attic above let electricians fish new wire with fewer wall openings than a slab home. Plaster-and-lath walls are the challenge: openings are small and planned, and patching is coordinated as part of the project. In designated City of Tampa historic districts, exterior changes such as relocating the meter or service mast may need historic preservation review, so we plan service work early.

1950s–1970s Concrete Block Ranches: Palma Ceia, Carrollwood, Town 'n' Country and Shore Acres

Typical scope: It depends on the wiring. Homes with 1965–1973 aluminum branch wiring often qualify for remediation with listed connectors ($3,000–$8,000) instead of a full rewire. Homes with brittle cloth-sheathed copper or repeated overheating need partial or whole-home rewiring routed through the attic.

Florida's mid-century housing boom produced thousands of concrete block (CBS) ranch homes on slabs, many with terrazzo floors, across Palma Ceia, Carrollwood, Town 'n' Country, Temple Terrace, and Pinellas County neighborhoods like Shore Acres. That construction shapes the rewire more than any other factor.

What the scope usually includes

  • Aluminum wiring remediation: every connection point pigtailed to copper with connectors listed for aluminum-to-copper connections, such as COPALUM or AlumiConn. Our Aluminum vs. Copper Wiring guide covers when remediation is enough.

  • Partial rewiring: replacing specific circuits that show heat damage, brittle insulation, or overloading, often the kitchen, bathrooms, and HVAC circuits first.

  • Whole-home rewire when wiring is degraded throughout or a gut renovation opens the walls anyway.

  • Panel replacement where the home still has a Federal Pacific, Zinsco, or undersized panel.

How block construction changes the work

With a slab and terrazzo below, everything routes through the attic. Interior frame walls are fished from above. Exterior block walls are the hard part: wiring typically runs in the furring-strip space behind drywall, which can mean more wall openings on exterior walls. Where opening walls is not practical, listed surface raceways can be a clean, code-compliant option. Low-slope roofs with tight attics add time, which is why two homes of the same square footage can be quoted very differently.

Waterfront Homes: Davis Islands, Snell Isle, Belleair and Apollo Beach

Typical scope: Partial, corrosion- and flood-driven rewiring. Exterior circuits, the service entrance, and dock feeders are the usual targets. Wiring that was submerged in saltwater during a storm surge generally needs replacement, not drying out.

On Davis Islands, Culbreath Isles, Snell Isle, Belleair, and Apollo Beach, the interior wiring is often in decent shape while everything facing the water ages fast. After Hurricanes Helene and Milton pushed surge into Tampa Bay neighborhoods in 2024, many waterfront rewires are flood recovery projects.

What the scope usually includes

  • Service entrance and exterior circuits: corroded meter bases, disconnects, and exterior receptacles replaced with corrosion-resistant, wet-location-rated equipment.

  • Dock feeders and pedestals: rewired to NEC 555, including ground-fault protection at no more than 30 mA on shore-power receptacles and no more than 100 mA on the dock feeder (2020 NEC 555.35).

  • Flood-damaged circuits: Industry guidance from NEMA treats wire, devices, and breakers submerged in water, especially saltwater, as replacement items. Ground-floor and garage circuits are rewired, and outlets are often raised.

  • Equipment elevation: relocating panels, disconnects, and generator transfer equipment above expected flood levels where practical.

See our Dock Electrical Safety and Pinellas County Waterfront Electrical Safety and Insurance guides for more on marine electrical work.

Gut Remodels and Additions: South Tampa, Seminole Heights and Old Northeast

Typical scope: Open-wall rewiring to current code. When the drywall is already off, a full rewire costs the least per circuit and takes the least time per circuit that it ever will. Skipping it means closing new walls over old wire.

South Tampa's renovation market and the steady flow of restorations in Seminole Heights and Old Northeast put many homes into gut remodels. That is the best moment to rewire, and the most common missed opportunity: a beautiful new kitchen fed by a 1958 circuit.

What the scope usually includes

  • Load calculation to confirm whether the service can support new appliances, an EV charger, and a pool heat pump. Many remodels trigger a 200-amp upgrade.

  • Kitchen circuits: at least two 20-amp small-appliance circuits, dedicated circuits for the range, dishwasher, disposal, microwave, and refrigerator as needed, with GFCI where required.

  • Bathroom circuits: a dedicated 20-amp receptacle circuit and GFCI protection.

  • AFCI, tamper-resistant receptacles, and smoke alarm circuits to current code.

  • Lighting plan: recessed, under-cabinet, and accent lighting circuits with switch locations planned before drywall.

  • Rough-in inspection coordination with your general contractor's schedule so electrical never holds up drywall.

Modern Homes (1990s and Newer): Westchase, Tampa Palms, Odessa, and Lutz

Typical scope: Rarely a full rewire. Modern homes need targeted circuits for new loads: Level 2 EV chargers, pool heat pumps, battery backup, generators, and subpanels for garages or guest suites.

Homes built from the 1990s onward in Westchase, Tampa Palms, Odessa, and Lutz generally have sound copper wiring. The work is about adding capacity cleanly.

  • Dedicated circuits for an EV charger (NEC 625), pool heat pump, or workshop.

  • Backup power integration: transfer equipment for a standby generator (NEC 702) or a battery system like the Anker Solix E10.

  • Subpanels for detached garages, casitas, and outdoor kitchens.

  • Whole-home surge protection, which most homes built before Florida's 8th Edition (2023) Building Code took effect on December 31, 2023 were not required to have.

See our Electrical Upgrade Before an EV Charger and Home Generator Installation guides for those projects.

Commercial Rewiring in Tampa Bay

Commercial rewiring at a glance: Commercial rewires use different wiring methods than homes, often three-phase power, and must be phased around business operations. Typical projects are tenant improvements, older office and retail rewires, restaurant equipment circuits, and flex and warehouse upgrades. Pricing is quoted after a site survey.

Mr. Electric of Tampa Bay has extensive experience rewiring both residential and commercial properties, and serves light commercial clients across Hillsborough and Pinellas: retail and restaurants in Hyde Park Village, SoHo, Westshore, and downtown St. Petersburg; professional and medical offices; and flex and warehouse space along the Benjamin Road and airport corridor near our own shop.

Common commercial rewire projects

Project type

What the scope usually includes

Retail or office tenant improvement

Demolition of abandoned circuits, new branch circuits to the new floor plan, LED lighting with energy-code controls, exit and emergency lighting, panel schedule update

Restaurant build-out or refresh

Dedicated circuits for cooking equipment, walk-in coolers, and hood systems; GFCI in kitchen areas; three-phase equipment connections

Older office building (1970s–1990s)

Replacement of aging panelboards, phased branch-circuit rewiring floor by floor, capacity for modern IT and HVAC loads

Warehouse and flex space

High-bay LED lighting circuits, equipment and compressor circuits, dock-door and exterior lighting, EV charging for fleets

Medical and professional offices

Dedicated equipment circuits, isolated or grounded receptacles as specified, coordinated low-voltage pathways


Our commercial process

  1. Site survey: panels, feeders, existing wiring methods, and infrared scanning of energized equipment where useful.

  2. Written scope and phasing plan: what is replaced, in what order, and when power will be off.

  3. Permits and drawings: pulled and coordinated with the City of Tampa, Hillsborough or Pinellas County, or the local municipality.

  4. Phased installation and inspections on the agreed schedule.

  5. Closeout: updated panel schedules, permit closeout, and documentation for your landlord, insurer, or facilities team.

For ongoing upkeep after a rewire, see our Commercial Electrical Maintenance Checklist. Property managers adding charging should also read our Commercial EV Charging Station guide.

What Drives Rewiring Cost Up or Down

Increases cost

Keeps cost lower

Slab foundation and tight, low-slope attic

Raised floor with crawlspace access

Plaster walls or finished exterior block walls

Open walls during a renovation

Service or panel upgrade added to scope

Existing 200-amp service in good condition

Multiple additions wired in different eras

Partial scope or aluminum remediation only

Commercial work phased after hours

Vacant space or planned shutdown window

Typical residential ranges in Tampa Bay: whole-home rewiring $8,750–$14,800 for an 1,800 sq ft home (larger and more complex homes run higher); aluminum remediation $3,000–$8,000; 200-amp panel upgrade $3,000–$5,000. Partial rewires and commercial projects are quoted after an on-site evaluation.

Illustrative ranges, not a quote. Pricing is confirmed in writing after an on-site evaluation.

Every quote from Mr. Electric of Tampa Bay is written and upfront before work begins, and includes permits and inspections. Every rewiring project is backed by a one-year parts and labor warranty covering both the materials we install and the work we perform: if anything related to our installation needs attention within 12 months, we return and correct it at no charge. Monthly payment options are available on larger residential projects through GreenSky.

Frequently Asked Questions

What does rewiring a house include?

A whole-home rewire replaces the branch-circuit wiring, outlets, and switches throughout the house, adds grounding and AFCI/GFCI protection to current code, and usually includes a panel or service upgrade. A partial rewire replaces only the affected rooms or circuits. The right scope depends on your home's construction and wiring type.

Can you rewire a concrete block house in Tampa?

Yes. In block homes on slabs, wiring is routed through the attic and down interior walls. Exterior block walls are wired through the furring space behind the drywall or, where appropriate, with listed surface raceway. Attic height has the biggest effect on time and cost.

Do I have to rewire my whole house if I have aluminum wiring?

Not always. Remediation that connects each aluminum conductor to copper with listed connectors such as COPALUM or AlumiConn is an accepted alternative to a full rewire and typically costs $3,000–$8,000 in Tampa Bay. A licensed evaluation determines which option fits your home.

Should wiring be replaced after a flood?

Generally, yes for anything that was submerged. NEMA guidance treats water-damaged wire, devices, and breakers as replacement items, and saltwater from storm surge accelerates corrosion. Have a licensed electrician evaluate the system before power is restored.

How long does a commercial rewire take?

It depends on the space and the phasing plan. A small tenant improvement may take a few days of electrical work; a multi-floor office rewire is scheduled in phases over weeks. We plan shutdowns around your operating hours.

What warranty comes with a rewire?

Every rewiring project from Mr. Electric of Tampa Bay carries a one-year parts and labor warranty starting the day the project is completed, along with the Neighborly Done Right Promise®. If any component we installed fails or any workmanship issue appears within 12 months, we return and correct it at no charge.

How soon can I get a rewiring evaluation?

Rewiring evaluations are typically available the same week you call. Call (813) 474-9789 to schedule, and you receive a written scope and upfront price after the visit.

Do I need a permit to rewire in Tampa Bay?

Yes. Residential and commercial rewiring requires a permit in the City of Tampa, Hillsborough County, Pinellas County, and their municipalities. Mr. Electric of Tampa Bay pulls permits and coordinates inspections as part of the project.

Get a Written Rewiring Scope for Your Home or Building

Whether it is a knob-and-tube bungalow in Seminole Heights, a block ranch in Palma Ceia, a flood-exposed waterfront home on Snell Isle, or a tenant space in Westshore, the first step is the same: a licensed on-site evaluation and a written scope, typically available the same week you call.

Mr. Electric of Tampa Bay is licensed (EC13015799), A+ rated by the BBB, a 2026 Best Choice Award winner, and backed by a 4.9-star rating from 1,080+ Google reviews. Every rewiring project carries a one-year parts and labor warranty and the Neighborly Done Right Promise®. Serving Hillsborough and Pinellas Counties since 1994.

Book Online

By checking this box, I agree to opt in to receive automated informational and promotional SMS and/or MMS messages from Mr. Electric, a Neighborly company, and its franchisees to the provided mobile number(s). Messages & data rates may apply. Message frequency varies. View Terms and Privacy Policy. Reply STOP to opt out of future messages. Reply HELP for help.

By entering your email address, you agree to receive emails about services, updates or promotions, and you agree to the Terms and Privacy Policy. You may unsubscribe at any time.

About Mr. Electric

Established in 1994, Mr. Electric® is a global franchise organization providing electrical installation and repair services. Recognized by Entrepreneur magazine among its “Franchise 500,” Mr. Electric franchisees provide these services to both residential and commercial customers at almost 200 locations worldwide. Mr. Electric is a subsidiary of the Neighborly® family of service franchises.
Learn More

Find Your Local Mr.Electric!

Let us know how we can help you today.

Call us at (813) 474-9789
Mr. Electric electrician arriving to perform electrical repair service.

Book Online

By checking this box, I agree to opt in to receive automated informational and promotional SMS and/or MMS messages from Mr. Electric, a Neighborly company, and its franchisees to the provided mobile number(s). Messages & data rates may apply. Message frequency varies. View Terms and Privacy Policy. Reply STOP to opt out of future messages. Reply HELP for help.

By entering your email address, you agree to receive emails about services, updates or promotions, and you agree to the Terms and Privacy Policy. You may unsubscribe at any time.