How much does outlet replacement cost in Tampa?

The cost to repair an outlet, switch, or GFCI unit depends on the underlying cause. Here are typical cost ranges: Standard receptacle replacement: $100–$225 per device (including diagnosis) New outlet installation: $179–$304 Replacing a GFCI outlet: $100–$250 These are illustrative costs; we’ll confirm pricing on-site.

What kinds of outlets can Mr. Electric of Tampa Bay install?

Our electricians can install: standard 3-prong, GFCI, AFCI, USB, smart home, tamper-resistant, and high-voltage outlets. We also install weather-resistant outdoor outlets with protective covers for patios, garages, pool areas, docks, and other spaces exposed to storms and humidity. If you’re not sure what type of outlet you need, or whether your existing wiring can safely support a new outlet, our electricians can assess the need and recommend a safe and appropriate solution.

Can I install an electrical outlet myself?

Outlet installation should be handled by a licensed electrician. If you're adding an outlet rather than replacing one, you may need a wiring upgrade , a new electrical box, a dedicated circuit, or an electrical permit. Leaving this work to a qualified electrician is the best way to keep your home safe and code-compliant.

Should I replace two-prong outlets?

Yes. Two-prong outlets lack grounding protection, leaving your home exposed to hazards like shocks and electrical fires. Plus, surge protectors don’t work properly without a ground. Replacing ungrounded outlets with grounded three-prong outlets is the safer solution. However, simply swapping a two-prong receptacle with a three-prong doesn’t create a grounded outlet because the new outlet still needs a ground wire. Our electricians can evaluate your existing wiring and recommend the appropriate solution: Install a three-prong outlet if a grounding wire is present. Install a GFCI outlet on an ungrounded circuit.* Install a true ground wire and a grounded outlet. *Requires a GFCI outlet labeled “No Equipment Ground.” Note that GFCI protection isn’t the same as true grounding: A GFCI outlet can protect people from shock on an ungrounded circuit, but it doesn’t protect electronics from voltage spikes.

How long does an outlet replacement take?

Replacing a standard single outlet typically takes 15 to 30 minutes when the existing wiring and electrical box are in good condition. However, the total appointment takes longer because our electricians need to inspect the circuit , shut off the power, complete the replacement, and test the outlet. Installing a completely new outlet can take longer than replacing a receptacle if it involves new wiring, adding an electrical box, or installing a new circuit.

Should I replace all outlets with GFCI?

No, you don't need GFCI outlets throughout your entire home, but GFCI protection is required in specific locations where electrical shock hazards are greater. Under the 2020 NEC 210.8, as adopted in Florida, GFCI protection is required for receptacles in or near boathouses, docks, and pool and spa areas (covered by NEC 680), and within 6 feet of any sink or tub. That matters in the Tampa Bay area because thunderstorms, rain, and high humidity increase the risk of moisture exposure.

Do local electricians follow specific safety standards?

Yes. Mr. Electric’s licensed electricians follow the 2020 NEC 210.8, as adopted in Florida, along with any local jurisdiction amendments. They also follow OSHA and NFPA 70E rules to protect themselves while working on live equipment.

Outlet Replacement & Installation Service in Tampa, FL

Mr. Electric® of Tampa Bay provides professional, code-compliant outlet installation and replacement for homes throughout the greater Tampa Bay area. Whether you need a brand new outlet, additional outlets for a home office or kitchen remodel, or a replacement for an aging two-prong receptacle, our licensed electricians can help. We provide upfront flat-rate pricing and convenient appointments for all electrical outlet services.

Ready to upgrade? Schedule service online today.

Residential
Commercial

Book Online

First Name*

Last Name*

Email*

Phone Number*

Street Address*

ZIP/Postal Code*

Yes! You can text me service reminders and other messages.

By checking this box, I agree to opt in to receive automated informational and promotional SMS and/or MMS messages from Mr. Electric, a Neighborly company, and its franchisees to the provided mobile number(s). Messages & data rates may apply. Message frequency varies. View Terms and Privacy Policy. Reply STOP to opt out of future messages. Reply HELP for help.

By entering your email address, you agree to receive emails about services, updates or promotions, and you agree to the Terms and Privacy Policy. You may unsubscribe at any time.

When Do I Need Outlet Replacement & Installation Services in Tampa Bay?

Many older Tampa homes were built before today's power-hungry appliances and advanced electronics existed. If you rely on extension cords, power strips, or shared outlets to run multiple appliances, adding new outlets or dedicated circuits can provide a safer, more stable solution.

However, flickering lights, frequently tripping breakers, or warm switch plates can indicate an overloaded circuit or another electrical issue. Simply replacing an outlet won't solve these problems. Our electricians can assess your system and recommend adding dedicated circuits or upgrading your electrical panel.
Does your home still have two-prong outlets? These outlets lack a ground, increasing the risk of shocks, electrical fires, and voltage spikes that damage electronics. Mr. Electric can evaluate your wiring and recommend an appropriate upgrade, such as properly grounded three-prong outlets or GFCI receptacles.
Every room in your home has unique power demands. A Mr. Electric service professional can install modern options tailored to your needs, such as:
- GFCI safety outlets in kitchens, bathrooms, and outdoors
- Built-in USB and USB-C charging ports
- Smart home-compatible receptacles
- 240V dedicated lines for high-power appliances and EV chargers

Our Electrical Outlet Replacement & Installation Services

From upgrading outdated two-prong outlets to installing modern GFCI or USB-compatible units, our team handles every project with precision. Whether you're adding a charging station, installing a dedicated appliance outlet, or making your pool or dock area code-compliant, we'll recommend solutions suited to your home's wiring and electrical needs.

When you choose us for your outlet upgrades, you enjoy a seamless process built around your schedule and budget:

Upfront Pricing: Our electricians provide clear, flat-rate pricing before starting the installation. There are never any hidden fees or surprise charges.
Timely Service: Our team arrives in fully stocked vehicles ready to complete the job during your scheduled appointment time.
Trusted Workmanship: All work is backed by the Neighborly Done Right Promise® to ensure your satisfaction.

With an average rating of 4.9/5 stars from over 1,000 verified reviews, it’s easy to see why your friends and neighbors trust Mr. Electric of Tampa Bay.

Mr. Electric of Tampa Bay serves local homes and businesses in Tampa, Clearwater, Oldsmar, Lutz, Odessa, Citrus Park, Westchase, St. Petersburg, and other nearby communities. Wherever you’re located, you can count on our team for efficient, courteous, code-compliant electrical work. Need emergency electrical services? Reach out to our team 24/7. You’ll receive upfront, flat-rate pricing no matter when you call.

Outlet Replacement & Installation in Tampa Bay FAQs

Have questions about the electrical outlets in your home? Here are answers to some of our most common inquiries from Tampa-area homeowners.

The cost to repair an outlet, switch, or GFCI unit depends on the underlying cause. Here are typical cost ranges:
- Standard receptacle replacement: $100–$225 per device (including diagnosis)
- New outlet installation: $179–$304
- Replacing a GFCI outlet: $100–$250
These are illustrative costs; we’ll confirm pricing on-site.
Our electricians can install: standard 3-prong, GFCI, AFCI, USB, smart home, tamper-resistant, and high-voltage outlets.

We also install weather-resistant outdoor outlets with protective covers for patios, garages, pool areas, docks, and other spaces exposed to storms and humidity.

If you’re not sure what type of outlet you need, or whether your existing wiring can safely support a new outlet, our electricians can assess the need and recommend a safe and appropriate solution.
Outlet installation should be handled by a licensed electrician. If you're adding an outlet rather than replacing one, you may need a wiring upgrade, a new electrical box, a dedicated circuit, or an electrical permit. Leaving this work to a qualified electrician is the best way to keep your home safe and code-compliant.
Yes. Two-prong outlets lack grounding protection, leaving your home exposed to hazards like shocks and electrical fires. Plus, surge protectors don’t work properly without a ground. Replacing ungrounded outlets with grounded three-prong outlets is the safer solution.

However, simply swapping a two-prong receptacle with a three-prong doesn’t create a grounded outlet because the new outlet still needs a ground wire.

Our electricians can evaluate your existing wiring and recommend the appropriate solution:
- Install a three-prong outlet if a grounding wire is present.
- Install a GFCI outlet on an ungrounded circuit.*
- Install a true ground wire and a grounded outlet.
*Requires a GFCI outlet labeled “No Equipment Ground.” Note that GFCI protection isn’t the same as true grounding: A GFCI outlet can protect people from shock on an ungrounded circuit, but it doesn’t protect electronics from voltage spikes.
Replacing a standard single outlet typically takes 15 to 30 minutes when the existing wiring and electrical box are in good condition. However, the total appointment takes longer because our electricians need to inspect the circuit, shut off the power, complete the replacement, and test the outlet.

Installing a completely new outlet can take longer than replacing a receptacle if it involves new wiring, adding an electrical box, or installing a new circuit.
No, you don't need GFCI outlets throughout your entire home, but GFCI protection is required in specific locations where electrical shock hazards are greater.

Under the 2020 NEC 210.8, as adopted in Florida, GFCI protection is required for receptacles in or near boathouses, docks, and pool and spa areas (covered by NEC 680), and within 6 feet of any sink or tub. That matters in the Tampa Bay area because thunderstorms, rain, and high humidity increase the risk of moisture exposure.
Yes. Mr. Electric’s licensed electricians follow the 2020 NEC 210.8, as adopted in Florida, along with any local jurisdiction amendments. They also follow OSHA and NFPA 70E rules to protect themselves while working on live equipment.

Residential & Commercial Services

Residential
Commercial