Does Arkansas code require a surge protective device?

It applies to brand-new electrical services and complete replacements. Under Article 230.67 of the National Electrical Code—which Arkansas enforces statewide through its Department of Labor and Licensing—you need a Type 1 or Type 2 surge protector installed right at the main equipment. Older panels are grandfathered in, so you aren't required to upgrade an existing setup. That said, it makes total sense to put one in if you're ever changing out your panel anyway, since the electrician is already doing the main wiring work.

How often do surges hit homes in Benton County?

It happens far more frequently than local storm counts might suggest. According to the National Weather Service, Arkansas actually ranks fifth in the country for lightning density, recording roughly 15.7 ground strikes per square mile annually. That said, most voltage spikes in Rogers stem from everyday power grid switching rather than massive lightning hits. If you ever notice your lights dimming briefly on a completely clear day, that usually signals a loose service line connection that ought to be inspected.

What other electrical work do you handle in Rogers?

Surge protection is one piece of the panel work we do. Our Rogers electricians also handle: Electrical panel upgrades when a 100-amp service runs out of room Home generators sized and wired for multi-day outages EV charger installation and replacement on a dedicated 240 volt circuit Hot tub and spa installation with GFCI-protected disconnects Circuit restoration rounds out the list after storm damage. One visit often covers the surge device and whatever else has been nagging you.

How much damage does a power surge cause?

A single strong strike can easily destroy your HVAC unit, stove, and TV all in the same afternoon. Data from the Insurance Information Institute shows American insurance companies paid over $1 billion for lightning damage claims in 2024, averaging around $18,600 per home. It helps to snap pictures of your electrical panel sticker and appliance model tags today. If you ever need to file a claim here in Rogers, having actual serial numbers ready will speed up the payout process significantly.

What is a surge protector, and how does it work?

A whole home surge protector mounts at or beside your electrical panel and limits the voltage reaching branch circuits. The National Electrical Code requires surge protection on the service equipment of new and replaced dwelling unit services under Article 230.67. In Rogers, work like this runs through the city Building Inspection office on an electrical permit, and an inspector signs off at the service. Most spikes have nothing to do with a direct hit. SWEPCO and Carroll Electric reclose lines and switch capacitor banks after wind events, and each operation pushes a short transient down the service drop. Benton County picks up thousands of flashes every storm season on top of that. Housing stock shapes the work. Older homes near downtown and out toward Prairie Creek still run crowded 100-amp panels with tired bus bars, which sometimes means a panel upgrade comes first. Newer builds around Pinnacle and Shadow Valley carry the opposite exposure: variable speed HVAC, induction cooktops, EV chargers, irrigation controllers, and three or four smart thermostats. All of it is electronic. We size the device to the service, check available fault current, and confirm the ground before anything gets mounted.

Which areas near Rogers do you cover for surge protection?

Our service range runs across Benton County, including Bentonville , Cave Springs , and Avoca . Lake homes east of Rogers sit on long rural feeders with more exposure to line faults, so grounding gets a closer look there.

How do I schedule surge protection installation in Rogers?

Call the office or schedule an appointment with Mr. Electric of Rogers, and we'll set a window that works around your day. We walk the panel first, check the main breaker rating and grounding, then quote the device, the breaker, and the permit as one flat price. In the same visit, we look at anything else on your list: panel capacity, a generator inlet, an EV circuit, or a spa disconnect. Most surge installs wrap up the same day.

Whole Home Surge Protection in Rogers, AR

One strike on a nearby distribution line sends a voltage spike straight through your service entrance. Mr. Electric of Rogers installs whole home surge protection at the panel, so the spike burns out a replaceable device instead of your HVAC control board. We pull the electrical permit, mount the unit, and test the ground before we leave. Call your local Rogers electrician and get the house covered before the next round of storms.

Residential
Commercial

Book Online

First Name*

Last Name*

Email*

Phone Number*

Street Address**

ZIP/Postal Code*

Yes! You can text me service reminders and other messages.

By checking this box, I agree to opt in to receive automated informational and promotional SMS and/or MMS messages from Mr. Electric, a Neighborly company, and its franchisees to the provided mobile number(s). Messages & data rates may apply. Message frequency varies. View Terms and Privacy Policy. Reply STOP to opt out of future messages. Reply HELP for help.

By entering your email address, you agree to receive emails about services, updates or promotions, and you agree to the Terms and Privacy Policy. You may unsubscribe at any time.

How Whole Home Surge Protection Works

The last thing anyone wants is a voltage spike that threatens your electronic devices and major appliances. What a panel-mounted device does is provide a protective layer that halts a voltage spike from coming in on the utility line and diverts it to ground.
Installation runs about two hours on a straightforward service. We shut off the main, mount a Type 2 device beside the panel, land it on a dedicated two-pole breaker with short leads, then verify the grounding electrode conductor and bonding. Short wire runs matter here. Every extra foot of lead length raises the let-through voltage the rest of your wiring sees.
A point-of-use protector will stop what can sneak past the electrical panel, not what comes to the meter. It's always good to layer your protection because it will give you peace of mind knowing that you won't run into any issues. One device will start at the service, then the strips at the meter. One thing to note is that strips wear out quietly, and you will need to check their status about twice a year.

Why Choose Mr. Electric of Rogers for Surge Protection in Rogers, AR

Locally owned, nationally backed. Mr. Electric of Rogers has been running since 1994 and belongs to the Neighborly family of home service brands, so the crew at your door follows national training standards while answering to neighbors here in Benton County.

You get the price before the work starts, quoted by the job instead of the hour. No meter running while someone hunts for a part. Our licensed electricians show up in stocked trucks, torque every connection to spec, and explain what the indicator light on your new device means and when the unit needs replacing. Every call is backed by the Neighborly Done Right Promise®. If something isn't right, we come back and fix it.

Frequently Asked Questions About Whole Home Surge Protection in Rogers, AR

A whole home surge protector mounts at or beside your electrical panel and limits the voltage reaching branch circuits. The National Electrical Code requires surge protection on the service equipment of new and replaced dwelling unit services under Article 230.67. In Rogers, work like this runs through the city Building Inspection office on an electrical permit, and an inspector signs off at the service.

Most spikes have nothing to do with a direct hit. SWEPCO and Carroll Electric reclose lines and switch capacitor banks after wind events, and each operation pushes a short transient down the service drop. Benton County picks up thousands of flashes every storm season on top of that.

Housing stock shapes the work. Older homes near downtown and out toward Prairie Creek still run crowded 100-amp panels with tired bus bars, which sometimes means a panel upgrade comes first. Newer builds around Pinnacle and Shadow Valley carry the opposite exposure: variable speed HVAC, induction cooktops, EV chargers, irrigation controllers, and three or four smart thermostats. All of it is electronic. We size the device to the service, check available fault current, and confirm the ground before anything gets mounted.
A single strong strike can easily destroy your HVAC unit, stove, and TV all in the same afternoon. Data from the Insurance Information Institute shows American insurance companies paid over $1 billion for lightning damage claims in 2024, averaging around $18,600 per home. It helps to snap pictures of your electrical panel sticker and appliance model tags today. If you ever need to file a claim here in Rogers, having actual serial numbers ready will speed up the payout process significantly.
It applies to brand-new electrical services and complete replacements. Under Article 230.67 of the National Electrical Code—which Arkansas enforces statewide through its Department of Labor and Licensing—you need a Type 1 or Type 2 surge protector installed right at the main equipment. Older panels are grandfathered in, so you aren't required to upgrade an existing setup. That said, it makes total sense to put one in if you're ever changing out your panel anyway, since the electrician is already doing the main wiring work.
It happens far more frequently than local storm counts might suggest. According to the National Weather Service, Arkansas actually ranks fifth in the country for lightning density, recording roughly 15.7 ground strikes per square mile annually. That said, most voltage spikes in Rogers stem from everyday power grid switching rather than massive lightning hits. If you ever notice your lights dimming briefly on a completely clear day, that usually signals a loose service line connection that ought to be inspected.
Surge protection is one piece of the panel work we do. Our Rogers electricians also handle:
- Electrical panel upgrades when a 100-amp service runs out of room
- Home generators sized and wired for multi-day outages
- EV charger installation and replacement on a dedicated 240 volt circuit
- Hot tub and spa installation with GFCI-protected disconnects
Circuit restoration rounds out the list after storm damage. One visit often covers the surge device and whatever else has been nagging you.
Our service range runs across Benton County, including Bentonville, Cave Springs, and Avoca. Lake homes east of Rogers sit on long rural feeders with more exposure to line faults, so grounding gets a closer look there.
Call the office or schedule an appointment with Mr. Electric of Rogers, and we'll set a window that works around your day. We walk the panel first, check the main breaker rating and grounding, then quote the device, the breaker, and the permit as one flat price. In the same visit, we look at anything else on your list: panel capacity, a generator inlet, an EV circuit, or a spa disconnect. Most surge installs wrap up the same day.

Residential & Commercial Services

Residential
Commercial