Licensed Electrician in Greensboro, NC | Electrical Repair, Panels & More

Your electrical system gives you warning signs before a serious problem develops. Flickering lights, dimming lights when an appliance starts, tripping breakers, and outlets that stop working are all symptoms of an underlying electrical issue. So is a burning smell near an outlet or a panel that feels warm to the touch. These signs point to loose connections, overloaded circuits, outdated wiring, or a failing breaker, and none of them get better on their own.

Loose connections are one of the most common causes of electrical problems in Greensboro homes. A loose wire creates resistance. Resistance creates heat. Heat damages the insulation around the wire. Over time, damaged insulation is a leading cause of house fires. The U.S. Fire Administration reports that electrical failures cause an estimated 24,000 residential fires each year in the United States. Our licensed electricians diagnose the root cause, explain their findings, and provide an upfront price before any work begins.

Common Electrical Warning Signs and What They Mean

• Flickering or dimming lights: Often signals a loose connection, a failing circuit breaker, or an overloaded circuit due to large appliances.
• Tripping breakers: A breaker that trips repeatedly is protecting you from an overloaded or short-circuited wire. Frequent trips mean the circuit is drawing more current than it is rated for.
• Warm or discolored outlets: Heat at an outlet indicates a loose connection or wiring problem that needs immediate attention.
• Burning smell from outlets or the panel: Stop using the affected outlet and call a licensed electrician the same day.
• Outdated breaker or panel: Panels with Federal Pacific or Zinsco breakers have documented failure rates and are no longer considered safe by most electrical professionals.
• Outlets with no GFCI protection in wet areas: Kitchens, bathrooms, garages, and exterior outlets require GFCI protection under the National Electrical Code.

Absolutely. Most homes built before 2000 in Greensboro have 100-amp electrical panels. That was adequate when homes had fewer appliances and no home offices, EV chargers, or modern HVAC systems. A 100-amp panel struggles to meet today's electrical needs. If your breakers trip regularly, your lights dim when the air conditioner starts, or you want to add a Level 2 EV charger, upgrading to a 200-amp panel is the right move.

Breaker panel replacements and electrical service upgrades in Greensboro require a permit from Guilford County Code Enforcement. The work must meet the National Electrical Code (NEC) and any North Carolina state amendments. Our electricians pull the permit, coordinate the planned outage with Duke Energy, complete the panel installation, and schedule the final inspection. You do not have to manage any part of that process.

Signs Your Electrical Panel Needs Replacement

• Breakers trip frequently under normal household loads
• The panel has no room for additional circuits
• Your home runs on a 60-amp or 100-amp service, and you want to add an EV charger or hot tub
• The panel contains Federal Pacific Stab-Lok or Zinsco breakers
• Breakers fail to trip during an overload (a serious safety hazard)
• The panel shows signs of rust, burning, or melted components
• Your home is more than 25 years old and has never had an electrical service upgrade

What to Expect During a Panel Upgrade

• Our electrician assesses your current service and calculates your load requirements
• We pull the required permit from Guilford County Code Enforcement
• We coordinate the planned outage with Duke Energy for the service disconnect
• The panel installation typically takes four to eight hours, depending on the scope
• We label every circuit clearly and test the entire system before leaving
• A Guilford County inspector performs the final inspection and issues approval

Yes! Older homes in Greensboro neighborhoods like Sunset Hills, Westerwood, and Lindley Park often have electrical wiring that was installed decades ago. Knob-and-tube wiring, common in homes built before 1950, uses an open-air system without a ground wire. Aluminum wiring, found in some homes built in the 1960s and 1970s, expands and contracts differently from copper and creates loose connections over time. Both types increase the risk of electrical problems and are frequently flagged by home inspectors.

Whole-home rewiring replaces outdated wiring with modern copper conductors that meet current National Electrical Code requirements. It is a significant project, but it is the right solution when your wiring is no longer safe or code-compliant. Our electricians complete wiring repairs and full rewiring projects throughout Greensboro with permits, inspections, and a clear scope of work explained upfront.

Wiring Types That Need Replacement

• Knob-and-tube wiring: Found in pre-1950 homes. No ground wire, no protection against overloads. Difficult to insulate properly.
• Aluminum branch circuit wiring: Found in some 1960s and 1970s homes. Requires special connectors and devices rated for aluminum. Connections loosen over time and create heat at connection points.
• Cloth-sheathed wiring: The insulation on older wiring becomes brittle and cracks. Exposed conductors are a fire and shock hazard.
• Two-wire systems without a ground: Ungrounded outlets do not protect your electronics and are not compatible with modern appliances or surge protection devices.

North Carolina EV registrations have grown steadily, and Greensboro drivers are part of that trend. A Level 2 home EV charger is the practical choice for daily charging. It delivers 10 to 30 miles of range per hour of charging, compared to three to five miles per hour on a standard 120-volt outlet. Level 2 charging stations for electric cars require a dedicated 240-volt circuit with 40 to 50 amps.

Before we install your home EV charger, we assess your electrical panel. Most homes with a 100-amp panel need to be upgraded to 200 amps to safely support Level 2 charging alongside your existing electrical load. We handle the electrical assessment, pull the Guilford County permit, install the dedicated circuit and charging station, and arrange the final inspection. Duke Energy offers time-of-use rate plans that let you charge overnight at lower rates, which reduces your monthly cost.

What You Need for a Home EV Charger Install

• A 240-volt dedicated circuit (typically 40 to 50 amps)
• A 200-amp electrical panel (most 100-amp panels need upgrading first)
• A Guilford County permit for the new circuit installation
• A licensed electrician to install and inspect the wiring and outlets
• A NEMA 14-50 outlet or hardwired EVSE unit, depending on your charger model

Certainly! Greensboro experiences summer thunderstorms from May through September and occasional winter ice storms that knock out power for hours or days. A whole house generator keeps your refrigerator, heating and cooling system, medical equipment, and lights running when power fails. Standby backup generators start automatically within seconds of a power outage, so you do not have to do anything.

We install residential and commercial standby generators for business owners throughout Greensboro and Guilford County. Every generator installation includes a transfer switch, which safely disconnects your home from the Duke Energy grid before the generator powers your circuits. This protects utility workers and prevents backfeed damage. We size the generator to your home's electrical load, pull the required permit, complete the installation, and arrange the inspection. A properly installed standby generator adds measurable value to your home and keeps your family safe when the power goes out.

Yes, we do. Electrical safety in your Greensboro home starts with three things: proper protection at the panel, the right outlets in the right locations, and a current electrical inspection. Our electricians install and service all three.

A whole-house surge protector is installed at your electrical panel and stops voltage spikes before they reach your appliances, electronics, and HVAC system. Greensboro's summer storm season makes surge protection a practical investment, not an optional upgrade. A single nearby lightning strike sends thousands of volts through your service line in a fraction of a second. Panel-level protection is your first and most effective defense.

GFCI outlets are required by the National Electrical Code in kitchens, bathrooms, garages, crawl spaces, unfinished basements, and all exterior locations. A GFCI outlet monitors the current flowing through a circuit and shuts off power in as little as 1/40th of a second when it detects a ground fault. This protection prevents serious electrical shock in wet areas. Tamper-proof outlets use an internal shutter system to prevent objects from being inserted into the slots, protecting children without requiring plastic plug covers. Our electricians install both types throughout Greensboro homes as part of safety upgrades and new installations.

A home electrical inspection covers your panel, wiring, outlets, GFCI protection, smoke detectors, and overall code compliance. The National Fire Protection Association recommends an electrical inspection for any home more than 40 years old, after major renovations, or when buying or selling a property. We offer a complimentary electrical home safety check as a starting point. Our electrician walks through your home, identifies issues, and gives you a clear picture of your electrical system's condition.

Electrical Safety Protocols We Follow on Every Job

• All work meets or exceeds National Electrical Code (NEC) requirements and North Carolina state amendments
• We pull all required permits and schedule inspections through Guilford County Code Enforcement
• We test every circuit, outlet, and device before leaving your home
• We wear shoe covers to protect your floors and furniture during the job
• We clean up completely before we leave
• Every job is backed by the Neighborly Done Right Promise^®

Upgrading your lighting and ceiling fans is one of the most cost-effective ways to improve your home's comfort and reduce your energy bills. Energy-efficient lighting, including LED fixtures and recessed lighting, uses up to 75 percent less energy than incandescent bulbs, according to the U.S. Department of Energy. Our electricians install light fixtures, ceiling fans, recessed lighting, and landscape lighting throughout Greensboro homes.

Smart home electrical upgrades go further. Smart dimmers and lighting controls let you adjust brightness from your phone or automate lighting schedules. Programmable thermostats, when wired correctly, work with your heat pump or HVAC system to reduce energy use without sacrificing comfort. Our electricians handle the wiring and setup for smart home devices, ensuring everything integrates correctly with your existing electrical system.

Ceiling fan installation and light and ceiling fan installation projects require the right wiring at the ceiling box. Older homes often have light-only boxes that are not rated for the weight and movement of a ceiling fan. We assess the existing wiring, upgrade the box if needed, and install your fan correctly and safely. Landscape lighting adds security and curb appeal to your property. We install low-voltage and line-voltage outdoor lighting systems throughout Greensboro with weatherproof connections and code-compliant installations.

Absolutely. Business owners in Greensboro trust Mr. Electric for commercial electrical services that keep their operations running. Electrical problems in a commercial setting cost more than repair bills. Downtime, equipment damage, and safety risks all affect your bottom line. Our licensed electricians provide commercial electrical installation, wiring repairs, panel upgrades, lighting upgrades, and commercial generator installation for businesses throughout Guilford County.

Commercial electrical work in North Carolina requires a licensed electrical contractor. Our team holds a North Carolina Unlimited Electrical License, which covers the full scope of commercial and residential electrical work. We understand the code requirements for commercial properties, including dedicated circuits for commercial kitchen equipment, three-phase power for manufacturing and industrial applications, and emergency lighting systems. If your business needs a commercial generator to maintain operations during a power outage, we size, install, and service standby systems for commercial needs of all scales.

First, check whether your neighbors have power. If the outage affects the block or neighborhood, contact Duke Energy directly at 1-800-777-9898 to report the outage and get a restoration estimate. If your neighbors have power but your home does not, the problem is likely in your electrical panel, meter base, or service entrance. Check your main breaker first. If the main breaker has tripped, reset it once. If it trips again immediately, do not reset it. Call a licensed electrician. A breaker that trips repeatedly under no-load conditions points to a wiring fault or a failing panel component that requires professional diagnosis. Mr. Electric of Greensboro provides 24/7 emergency electrical service throughout Guilford County for situations exactly like this.

Greensboro Homeowner Tip: Save the Duke Energy outage reporting number in your phone: 1-800-777-9898. If your outage is isolated to your home while neighbors have power, call us directly. We serve Greensboro and the surrounding areas around the clock.

Certain electrical warning signs require immediate action. A burning smell from an outlet, switch, or your electrical panel is an emergency. So is visible sparking, a panel that is warm or hot to the touch, outlets or switches that are discolored or melted, and any sign of smoke near electrical components. The U.S. Fire Administration reports that electrical failures cause approximately 24,000 residential fires in the United States each year. If you see or smell any of these signs, stop using the affected outlet or circuit, turn off the circuit at the breaker if you can do so safely, and call a licensed electrician immediately. Do not wait. Do not attempt to inspect wiring yourself.

Tip: If you smell burning and cannot identify the source, treat it as a potential electrical fire. Call 911 first if you see smoke or flames. Then call us. We provide 24/7 emergency electrical service throughout Greensboro and Guilford County.

Yes. Mr. Electric of Greensboro provides 24/7 emergency electrical service for urgent electrical problems that cannot wait. This includes situations like a complete loss of power to your home when the utility is not the cause, burning smells from your panel or outlets, sparking wiring, and circuit failures affecting critical systems like medical equipment or heating and cooling. Our licensed electricians are available around the clock to serve Greensboro, High Point, Jamestown, Oak Ridge, Summerfield, and surrounding Guilford County communities. When you call, you speak with a real person who dispatches a technician to your location. Verify current emergency service availability and response times with our team when you call.

Tip: Keep our number saved for emergencies. For any electrical issue that involves sparking, burning smells, or a complete loss of power isolated to your home, call us rather than attempting to investigate the panel yourself.

Flickering or dimming lights in your Greensboro home typically signal one of three problems: a loose connection somewhere in the circuit, an overloaded circuit struggling to supply enough current, or a failing circuit breaker. When a large appliance like an air conditioner or refrigerator starts up and draws a surge of current, lights on the same circuit dim briefly. That is normal. Lights that flicker continuously, or that dim and stay dim, point to a loose wire connection or an undersized circuit. Loose connections create resistance, resistance creates heat, and heat damages wire insulation over time. The National Fire Protection Association identifies damaged wiring as a leading cause of residential electrical fires. If your lights flicker regularly, schedule a diagnostic visit before the problem gets worse.

Tip: If flickering started after a storm, check whether a tree limb has damaged your service entrance or meter base outside. If the exterior looks intact, the issue is likely inside your panel or wiring. Call us to diagnose it.

A circuit breaker trips when the current flowing through it exceeds its rated capacity. This is a safety feature, not a malfunction. The problem is what is causing the overload. The three most common causes are an overloaded circuit with too many devices drawing power at once, a short circuit caused by a wiring fault or a damaged appliance, and a ground fault in which current flows along an unintended path. If a breaker trips once and stays reset, the cause was likely a temporary overload. If the same breaker trips repeatedly, you have a wiring problem, an outdated breaker that is failing, or an undersized circuit for your current electrical needs. Resetting a breaker repeatedly without fixing the underlying cause is not a solution. It is a warning sign that needs professional diagnosis.

Tip: If your kitchen or bathroom breaker trips repeatedly, the circuit is likely overloaded. Many older Greensboro homes have 15-amp kitchen circuits that predate the modern requirement for 20-amp small appliance circuits. We assess your circuits and recommend the right upgrade.

A burning smell from an outlet or electrical panel is a serious warning sign that requires same-day attention. The most common causes are a loose wire connection that is arcing and burning the surrounding insulation, an overloaded outlet or breaker that is overheating, or a failing breaker that is not tripping as it should. The smell is often described as burning plastic or a hot, acrid odor. Stop using the outlet immediately. If the smell comes from your panel, do not open it. Turn off the main breaker only if you can do so safely and without touching anything inside the panel enclosure. The National Fire Protection Association identifies arc faults from loose connections and damaged wiring as a primary cause of the approximately 51,000 home electrical fires reported annually in the U.S. Call a licensed electrician the same day.

Tip: Burning smells from a panel in an older Greensboro home often indicate an outdated breaker that is failing to trip correctly. Federal Pacific Stab-Lok and Zinsco panels have documented failure rates. If your home has one of these panels, ask us about replacement options when we arrive.

Your electrical panel needs to be upgraded when it can no longer safely handle your home's electrical load. The clearest signs are breakers that trip frequently under normal use, lights that dim when large appliances start, a panel with no room for additional circuits, and a panel that is more than 25 years old and has never been replaced. Homes in Greensboro built before 2000 commonly have 100-amp panels. Today's electrical demands, including HVAC systems, home offices, kitchen appliances, and EV chargers, often exceed what a 100-amp service can safely deliver. An upgrade to a 200-amp panel gives your home the capacity to handle modern electrical needs. If your panel contains Federal Pacific Stab-Lok or Zinsco breakers, replacement is recommended regardless of age. These brands have documented failure rates and are no longer considered safe by most electrical professionals.

Tip: If you are planning to add an EV charger, a hot tub, or a home addition, schedule a panel assessment before the project starts. A 200-amp upgrade is frequently required, and the permit and inspection process through Guilford County Code Enforcement takes time to plan for.

A standard electrical panel upgrade in Greensboro takes four to eight hours for the installation, depending on the size of the existing panel, the number of circuits, and whether any additional wiring is needed. The full process takes longer because it includes permitting and inspection. Our electricians pull the required permit from Guilford County Code Enforcement before work begins, coordinate the planned power outage with Duke Energy for the service disconnect, complete the panel installation, and schedule the final inspection with the county. From permit application to final inspection approval, the total timeline is typically one to two weeks. We handle every step of that process. You do not have to contact Duke Energy or the county separately.

Tip: Plan your panel upgrades for a day when you can be home and without power for up to eight hours. We schedule the Duke Energy disconnect in advance to make the outage window predictable. Most customers are fully powered up and inspected within a week of the initial call.

Before installing a Level 2 home EV charger in Greensboro, your electrical panel must have sufficient capacity to support a dedicated 240-volt, 40- to 50-amp circuit. Most homes with a 100-amp panel need to be upgraded to 200 amps first. The installation also requires a permit from Guilford County Code Enforcement under NEC Article 625, which governs electric vehicle supply equipment. Our electricians assess your panel, determine whether an upgrade is needed, pull the permit, install the dedicated circuit and charging station, and arrange the final inspection. Duke Energy offers time-of-use rate plans for EV owners in North Carolina that let you charge overnight at lower rates. North Carolina EV registrations have grown steadily, and Level 2 home charging is the standard for daily use, delivering 10 to 30 miles of range per hour of charging.

Tip: Ask Duke Energy about their EV time-of-use rate plan before installing your charger. Charging between 9 p.m. and 6 a.m. at off-peak rates reduces your monthly charging cost significantly compared to charging during peak hours.

Electrical work in Greensboro that goes beyond simple fixture replacements requires a permit from Guilford County Code Enforcement. Permitted work includes electrical panel upgrades and replacements, new circuit installations, generator installations, EV charger installations, and major wiring projects. All permitted work must meet the National Electrical Code (NEC) as adopted by North Carolina, and a final inspection by a Guilford County inspector is required before the work receives approval. Simple tasks like replacing a light fixture, swapping an outlet cover, or resetting a breaker do not require a permit. Hiring a licensed electrical contractor means we handle the permit application and inspection scheduling for you. Unpermitted electrical work creates problems when you sell your home and voids most homeowner's insurance coverage for electrical-related claims.

Tip: Always ask your electrician whether your project requires a permit before work starts. If they say no to a panel upgrade or new circuit installation, that is a red flag. Licensed electricians in Guilford County pull permits because it is required by law and protects you.

The National Electrical Code (NEC) is published by the National Fire Protection Association (NFPA) and sets the minimum safety standards for all electrical installations in the United States. North Carolina adopts the NEC with state-specific amendments, and all electrical work in Greensboro must comply with the adopted edition. The NEC covers everything from the wire gauge required for specific circuits to where GFCI protection is mandatory, how EV charger circuits must be wired, and what type of breaker protection is required in bedrooms. When our electricians complete work in your home, every installation meets or exceeds the requirements of the NEC and Guilford County code. The NEC is updated every three years. Homes built under older code editions are not automatically required to be brought up to current code unless they undergo major renovations or additions.

Tip: If you are buying an older home in Greensboro, a pre-purchase electrical inspection tells you exactly which systems are up to current NEC standards and which ones need attention. We offer complimentary home electrical safety checks as a starting point.

A GFCI outlet, which stands for Ground Fault Circuit Interrupter, monitors the electrical current flowing through a circuit and shuts off power in as little as 1/40th of a second when it detects a ground fault. A ground fault occurs when current travels along an unintended path, often through a person, which causes serious electrical shock. Under NEC Article 210.8, GFCI protection is required in bathrooms, garages, all outdoor locations, crawl spaces, unfinished basements, kitchens within six feet of a sink, and several other wet or damp locations. Homes built before 1975 often lack GFCI protection in these areas. Our electricians install GFCI outlets throughout Greensboro homes as part of safety upgrades, bathroom and kitchen remodels, and general electrical inspections. A GFCI outlet has a TEST and RESET button on its face. If yours does not, it needs to be replaced.

Tip: Test your GFCI outlets monthly by pressing the TEST button. The outlet should go dead. Press RESET to restore power. If the outlet does not respond to the TEST button or trips without warning, call us to have it replaced. A GFCI that does not trip is not protecting you.

Electrical failures are the second leading cause of home fires in the United States, according to the National Fire Protection Association. The primary causes are arc faults from damaged or loose wiring, overloaded circuits, and failing electrical panels that do not trip when they should. An arc fault occurs when electricity jumps across a gap in damaged insulation or a loose connection, generating temperatures high enough to ignite surrounding wood framing and insulation. Prevention starts with a current electrical inspection. Our electricians identify loose connections, outdated wiring, overloaded circuits, and panels with known failure issues, such as Federal Pacific Stab-Lok breakers. AFCI breakers, required by the NEC in bedrooms and living areas of new construction, detect arc faults and shut off the circuit before a fire starts. Older homes in Greensboro often lack this protection and benefit from AFCI breaker installation.

Tip: If your Greensboro home was built before 2000 and has never had an electrical inspection, schedule one. Many house fires start in walls where nobody sees the warning signs. An inspection finds problems before they become emergencies.

Our electricians install tamper-resistant outlets throughout your home to protect young children from electrical shock. Under NEC Section 406.12, all 15-amp and 20-amp receptacles in dwelling units are required to be tamper-resistant in new construction and major renovations. Tamper-resistant outlets use an internal shutter mechanism that requires simultaneous pressure on both slots to open, which prevents a child from inserting an object into a single slot. We also install GFCI outlets in all wet areas of your home, including bathrooms, kitchens, and garages, where the risk of electrical shock is highest. For older Greensboro homes that still have two-prong ungrounded outlets, we replace them with properly grounded three-prong outlets or GFCI-protected outlets as an approved alternative. A whole-home electrical safety inspection identifies every outlet, circuit, and wiring issue that puts your family at risk.

Tip: Skip the plastic plug covers. They are easy for curious children to remove, creating a choking hazard. Tamper-resistant outlets are the code-compliant, permanent solution. We install them throughout your home in a single visit.

Yes. Greensboro has a significant housing stock built between the 1920s and 1980s in neighborhoods like Fisher Park, Irving Park, Sunset Hills, Westerwood, Lindley Park, and Starmount. Homes in these areas often have electrical systems that were never designed to meet modern electrical demands. Pre-1950 homes often have knob-and-tube wiring, which uses open-air conductors without a ground wire and cannot be safely insulated with modern blown-in insulation. Homes built in the 1960s and 1970s sometimes have aluminum branch-circuit wiring, which expands and contracts differently than copper and can create loose connections at outlets and switches over time. Both wiring types increase the risk of electrical problems and are frequently flagged during home sales. If your Greensboro home is more than 40 years old and has never had a full electrical inspection, schedule one before problems develop.

Tip: If you are buying a home in an older Greensboro neighborhood, request an electrical inspection as part of your due diligence. A licensed electrician gives you a complete picture of the wiring, panel, and safety devices before you close. We serve all Greensboro neighborhoods and surrounding Guilford County communities.

Yes. Every electrician at Mr. Electric of Greensboro is fully licensed and insured in compliance with North Carolina law. NC General Statute 87-43 requires all electrical contractors operating in North Carolina to hold a license issued by the NC State Board of Examiners of Electrical Contractors. Our team holds a North Carolina Unlimited Electrical License, the highest license classification in the state, which covers the full scope of residential and commercial electrical work with no restrictions on project size or type. Every electrician is also background-checked and professionally trained. We carry full liability insurance to protect you in the event of an accident on your property. When you hire Mr. Electric of Greensboro, you hire a team that meets every legal and professional requirement to work in your home or business.

Tip: You can verify any electrical contractor's license status in North Carolina through the NC State Board of Examiners of Electrical Contractors at ncbeec.org. Always confirm a contractor is licensed before allowing electrical work in your home.

A North Carolina Unlimited Electrical License is the highest electrical contractor license classification issued by the NC State Board of Examiners of Electrical Contractors. It authorizes the holder to perform all classes of electrical work with no restrictions on project size, voltage level, or building type. This means our electricians are qualified to work on everything from a simple outlet replacement in your Greensboro home to a full commercial electrical installation for a business in Guilford County. Lower license classifications restrict the scope and scale of work a contractor is legally permitted to perform. When you hire a contractor with an Unlimited License, you know they have met the state's highest standard for electrical knowledge and experience. This matters in complex projects such as panel upgrades, whole-home rewiring, generator installations, and commercial electrical work.

Tip: Always ask your electrician what license classification they hold before a major project starts. For panel upgrades, generator installations, and EV charger circuits, you want a licensed contractor with no scope-of-work limitations.

Several electrical upgrades reduce energy consumption in Greensboro homes. LED lighting uses up to 75 percent less energy than incandescent bulbs and lasts significantly longer, according to the U.S. Department of Energy. Smart dimmers and lighting controls let you reduce output and automate schedules so lights are never on longer than needed. Programmable thermostats, when wired correctly to your heat pump or HVAC system, reduce energy use for heating and cooling by automatically adjusting the temperature based on your schedule. Whole-house surge protection does not directly reduce energy use, but it protects your appliances and electronics from voltage spikes that can shorten their lifespan. Duke Energy offers energy efficiency programs and rebates for qualifying upgrades in North Carolina. Contact Duke Energy directly to ask about current offerings before scheduling your upgrade.

Tip: Start with a lighting upgrade for the fastest return on investment. Switching your home entirely to LED fixtures and bulbs reduces your lighting energy cost by up to 75 percent. We install recessed LED lighting, smart dimmers, and lighting controls throughout Greensboro homes in a single visit.

North Carolina law permits you to perform certain electrical work on your own primary residence, but the work must still meet the National Electrical Code and pass inspection by Guilford County Code Enforcement. Safe tasks include replacing a light fixture with a like-for-like swap, resetting a tripped circuit breaker, and testing and resetting a GFCI outlet. Any work involving your electrical panel, new circuit installation, wiring repairs, or modifications to your service entrance requires a licensed electrical contractor under NC General Statute 87-43. Attempting panel work or wiring repairs without proper training is dangerous and creates liability issues if something goes wrong. Unpermitted electrical work also creates problems when you sell your home. For anything beyond a basic fixture swap, hiring a licensed electrician is the right decision for your safety and your home's value.

Tip: The one safe DIY electrical check you should do regularly: test every GFCI outlet in your home by pressing the TEST button. If the outlet does not go dead or if it will not reset, call us. That outlet is not protecting you the way it should.

The National Fire Protection Association's NFPA 73 standard recommends an electrical inspection for any home more than 40 years old, when buying or selling a property, after major renovations, and after any electrical incident, such as a fire, flood, or significant storm damage. As a general maintenance practice, inspecting every 3 to 5 years is a reasonable interval for homes without known issues. Greensboro homes built before 1985 in neighborhoods like Fisher Park, Sunset Hills, and Westerwood are strong candidates for inspection, given the age of their wiring and panels. We offer a complimentary electrical home safety check as a starting point. Our electrician walks through your home, assesses the panel, outlets, wiring, and safety devices, and gives you a clear report on what needs attention and what is in good shape.

Tip: If you have never had your electrical system inspected and your home is more than 20 years old, schedule one now. The inspection is complimentary, and it gives you a complete picture of your electrical system's condition before a problem develops.

Yes. Mr. Electric of Greensboro provides commercial electrical services for businesses throughout Greensboro and Guilford County. Our team holds a North Carolina Unlimited Electrical License, which covers the full scope of commercial electrical installation, repair, and upgrade work. Commercial services include panel upgrades and electric service upgrades, wiring repairs and new circuit installations, commercial lighting upgrades and energy-efficient lighting conversions, commercial generator installations and service, and dedicated circuit installations for commercial kitchen equipment and specialized business needs. Business owners who experience electrical problems during operating hours face immediate financial impact. Our electricians respond quickly, diagnose the root cause, and restore your electrical system with code-compliant repairs. Contact us to discuss your commercial electrical needs and schedule a site assessment.

Tip: If your business operates critical equipment, a commercial standby generator keeps you running during power outages. We size, install, and service commercial generators for businesses throughout Guilford County. Ask us about generator options when you call.

The Neighborly Done Right Promise^® is a workmanship guarantee that backs every job Mr. Electric of Greensboro completes. It is straightforward: if the work is not done right, we come back and make it right. No arguments. No fees. No delays. This guarantee applies to all residential and commercial electrical services we provide throughout Greensboro and Guilford County. Mr. Electric is part of Neighborly, the world's largest home services company, with more than 30 brands and 5,500 franchises. The Done Right Promise^® reflects the standard every Neighborly brand holds itself to across all locations. When you hire Mr. Electric of Greensboro, you hire a locally owned business backed by a national organization with a clear, enforceable guarantee. Read what your neighbors say about our work on our customer testimonials page.

Tip: The Done Right Promise^® is not a marketing phrase. If you have a concern about completed work, call us. We address it. That is the standard we hold ourselves to on every job in Greensboro and across Guilford County.

Scheduling service with Mr. Electric of Greensboro is straightforward. Contact us online to submit your request, or book an appointment directly at a time that works for your schedule. When you call, our team asks a few questions about your electrical issue or project so we can send the right electrician with the right equipment. We serve Greensboro, High Point, Jamestown, Oak Ridge, Summerfield, Kernersville, and surrounding Guilford County communities. For electrical emergencies, we are available 24/7. For scheduled work, we provide an upfront price before any work begins, and we do not start until you approve it. We also offer a complimentary electrical home safety check for new customers who want a full picture of their electrical system before deciding on any work.

Tip: When you call or submit a request online, have a brief description of the issue ready. Knowing whether you have flickering lights, a tripped breaker, a planned project, or an emergency helps us dispatch the right electrician and provide an accurate time estimate.