The Electrician Arlington, TX Homeowners Can Rely On

Yes, most panel, new circuit, and major wiring jobs in Arlington need a permit from the City of Arlington before work starts. The city inspector then checks the work against the National Electrical Code, as Arlington has adopted it. In Texas, a licensed electrical contractor registered with the Texas Department of Licensing and Regulation (TDLR) normally pulls that permit. We handle the permit when your project requires one and coordinate the inspection so your upgrade stays code-compliant.

Yes. Mr. Electric of Arlington offers 24/7 service, so you can reach an emergency electrician in Arlington, TX at 2 a.m. as easily as at noon. If you lose power to part of your home, see sparks, smell burning, or hear unusual sounds from your panel, schedule emergency electrical repair. When a spring storm rips the service drop off your house, Oncor fixes its line, and we repair the mast, meter base, and panel on your side so Oncor can turn your power back on.

Breakers trip to protect your wiring from overheating, and the cause is usually an overloaded circuit, a short, a ground fault, or a failing breaker. Arlington summers make it worse: when your AC runs hard through a string of 100-degree afternoons, a weak breaker or a loose connection shows itself fast. Sometimes you need a dedicated circuit that feeds one device, like a garage freezer or table saw, on its own. We test the circuit, confirm the load, and recommend a safe fix such as a dedicated circuit, wiring repair, or circuit breaker replacement.

You often need a panel upgrade when you add large loads such as an EV charger, a hot tub, a workshop circuit, or a generator transfer switch. You also need service when your panel shows damage, corrosion, repeated breaker failures, or signs of overheating. If we open a Federal Pacific or Zinsco panel — older brands with known breaker problems that still turn up around Arlington — we'll recommend replacing it. We inspect your system, perform a load calculation, and explain whether a panel repair, a panel upgrade, or a full electrical panel replacement is the best fit for your house and your goals.

Most residential panel upgrades take one working day once the permit comes through. First, we run a load calculation and talk through what you plan to add, like an EV charger or a pool, so we size the new panel and service correctly. Many Arlington homes move from 100 or 150 amps to 200. Next, we pull the City of Arlington permit and schedule the power disconnect with Oncor when the job needs one. On install day, we swap the panel, land and label each circuit, and bring grounding and bonding up to code. The city inspector signs off, power comes back on, and we walk through the new panel with you so you know which breaker runs what.

Yes. GFCI protection is required for bathroom receptacles under the National Electrical Code because water raises the shock risk. A GFCI outlet shuts off power in a fraction of a second when it senses current leaking to ground. If your bathroom outlet lacks test and reset buttons, your home likely needs a GFCI outlet installation to meet current code. The same goes for your kitchen countertops, garage, laundry area, and outdoor outlets; in Arlington, you run pool pumps and pressure washers outside most of the year. We verify the circuit, confirm correct wiring, and test the device after installation.

Whole-house surge protection is a device we mount at your electrical panel to clamp voltage spikes before they reach your appliances, HVAC controls, and electronics. Surges come from lightning, utility switching, and big motors cycling in your home. In the North Texas storm season, power quality events happen often, and sensitive electronics feel the impact first. Our whole-house surge protection works as your first layer of defense, and we still recommend plug-in strips for your TV and computer as a second layer.

Yes, we install both Level 1 and Level 2 EV chargers. Level 1 charging uses a standard 120-volt outlet, and we can add a dedicated garage outlet. Level 2 charging needs a dedicated 240-volt circuit, and many installations require a 40-amp or 50-amp breaker depending on your charger rating. A load check comes first. A Level 2 charger often pushes an older Arlington panel past its limit. Then we confirm permit requirements and complete the EV charger installation so you can charge safely at home.

You have two backup power options with us. We can order and install home generators with an automatic transfer switch, or we can install a generator inlet and interlock to safely feed your panel from a portable generator—the setup we install most often. A correctly installed transfer switch or interlock keeps generator power isolated from Oncor's lines, which protects the crews working on your street. Winter Storm Uri in February 2021 left many Arlington homes dark for long stretches, and you may have wanted backup power ever since. Circuit sizing follows your priorities, like the fridge and furnace blower, and we test the system before we leave. For repairs or maintenance on the generator itself, you'll go through the manufacturer.

Yes. We install recessed lighting, LED lighting upgrades, under-cabinet lighting, dimmers, and ceiling fans. Outside, we wire landscape lighting along your walkways and beds, which helps when summer evenings are the only comfortable time to sit on your patio in Arlington. We mount fans on a fan-rated box so a heavy fan can't pull loose, and we test operation before we wrap up. One thing we don't do is holiday or Christmas light installation.

Yes. Our commercial electricians serve offices, storefronts, and other business spaces across Arlington and Mansfield. As your electrical contractor in Arlington, TX, we handle commercial electrical panel upgrades when you add equipment, plus LED retrofits and dedicated circuits for new machines. We also install commercial generators to keep refrigeration or servers running through an outage. When something fails during business hours, our emergency commercial electrical services get a crew to you so you can reopen, and we schedule disruptive work around your hours.

Beyond repairs and panels, we also take on the smaller jobs that make a house safer and easier to live in:

• Smoke and CO detectors: We install hardwired, interconnected smoke alarms, and our carbon monoxide detector installation covers homes with gas appliances or attached garages.
• Outlets and switches: We add new outlets, USB outlets, and switch replacements, and we handle electrical code updates when you remodel or sell.
• Smart home wiring: We wire and connect the smart switches and lighting controls you buy; we don't supply the devices.
• Pool and hot tub wiring: We install bonding, GFCI protection, and a disconnect within sight of the hot tub, at least 5 feet from the water.
• Electrical wiring: We run new circuits for remodels and handle electrical repairs on damaged or outdated wiring.

You can contact us today online, and our office will confirm a time that works for you, including 24/7 emergency repair. If you want the best local electrician in Arlington working on your home, tell us what you're seeing up front—like which outlets are dead or which breaker trips. We'll send an electrician with the right parts on the truck, so most jobs wrap up in one visit. Our team also covers Grand Prairie, Pantego, and Kennedale, so you get the same crew and the same standards a few miles from home.