How do I know if my breaker box needs an upgrade?

Several signs point to a panel that's reached its limit. Flickering lights under normal load, circuit breakers that trip repeatedly without a clear cause, and outlets that feel warm to the touch all indicate stress on your electrical system. A breaker box that hums, buzzes, or shows visible discoloration around the terminals is a fire hazard that needs immediate attention. If your panel has no open slots and you're planning to add circuits for a car charging station, pool equipment, or a new appliance, an upgrade is the right move before that work begins. Our team inspects your panel and gives you a clear picture of what's needed.

Does an electrical panel upgrade require a permit in Tempe, AZ?

Yes. The City of Tempe requires a permit for electrical panel replacement and electrical service upgrades. Permitted work gets inspected by the city, which confirms the installation meets current electrical codes and protects you if you sell the home. Skipping the permit is not worth the liability. We walk you through the process so there are no surprises on your end.

How long does an electrical panel upgrade take?

A standard residential panel upgrade in Tempe runs four to six hours from start to finish. That includes the utility disconnect, panel removal, new panel installation, circuit labeling, and final testing of every branch circuit. Your power will be off for most of that window. We schedule jobs with that in mind and give you a clear time estimate before we arrive. Larger scopes, such as a service entrance upgrade or a commercial project, take longer and are scheduled accordingly.

What other electrical services do you offer in Tempe?

Our team handles the full range of residential electrical services in Tempe and the surrounding area. That includes surge protection installation, lighting repair, lighting installations, ceiling fan installation, under-cabinet lighting, and Lutron ® lighting control systems. We also install backup generators, including Generac units, and handle generator installation for both residential and commercial properties. EVSE installation for residential and commercial Level 2 EV charging is a growing part of our work as more Tempe households add a car charging station.

Do you handle aluminum wiring replacement in older Tempe homes?

Yes. Aluminum wiring replacement is a common part of panel upgrade work in Tempe homes built during the 1960s and early 1970s. Aluminum wiring is not inherently dangerous when properly maintained, but it oxidizes at connection points over time. That oxidation increases resistance, generates heat, and raises the risk of electrical fires. We assess the extent of the aluminum wiring in your home, identify the highest-risk connections, and give you a clear scope of work. Addressing this during a panel upgrade is the most cost-effective time to do it.

Do you offer smart home and energy-efficient electrical upgrades?

Yes. Our team installs lighting control systems, including Lutron ® lighting control systems, LED lights, and energy-efficient options for both new and existing circuits. Smart home integrations, including smart switches, dimmers, and automated lighting fixtures, are part of our residential electrical installations work. If you're planning a home renovation and want to incorporate smart home features, we coordinate those electrical features into the panel upgrade scope so your new panel is sized correctly from the start.

What should I do if I have an emergency electrical need in Tempe?

Emergency electrical needs require fast action. If you smell burning near your breaker box, see sparking at an outlet, or lose power to part of your home without tripping a breaker, do not ignore it. Turn off the affected circuit if it's safe to do so, and call us immediately. Our team serves Tempe, Mesa, Gilbert, and Chandler with short response times for urgent electrical calls. We carry the materials for the most common emergency repairs on our service vehicles, so we're not making a second trip for parts.

How do I schedule an electrical panel upgrade in Tempe?

Scheduling is straightforward. Call our office or book your appointment online to set up a time that works for you. We'll confirm the appointment, give you a clear scope of work and price before we start, and handle everything from the permit to the final inspection. Our team serves Tempe, Mesa, Gilbert, and Chandler for panel repair and replacement, power outage diagnosis, EVSE installation, surge protection installation, lighting repair, backup generator installation and service, panel upgrades, and the full range of residential electrical services. If you have questions before booking, our Mesa electrician team is ready to help.

Electrical Panel Upgrade in Tempe, AZ

Tempe Electricians Ready to Upgrade Your Panel

Your electrical panel controls every circuit in your home. When it struggles to keep up with your electrical needs, you feel it in flickering lights, tripped breakers, and outlets that stop working without warning. Mr. Electric of Mesa, Gilbert & Chandler serves Tempe, AZ with electrical panel upgrades built to current NEC code, sized to your actual load, and installed by a team with 15 or more years of individual experience and over 100 years of combined field knowledge. If your electrical system is holding your home back, your Tempe electrician is ready to fix that today.

Tempe Electricians Ready to Upgrade Your Panel

Mr. Electric electrician showing circuit breaker board to two people.

Residential
Commercial

Book Online

First Name*

Last Name*

Email*

Phone Number*

Street Address**

ZIP/Postal Code*

Yes! You can text me service reminders and other messages.

By checking this box, I agree to opt in to receive automated informational and promotional SMS and/or MMS messages from Mr. Electric, a Neighborly company, and its franchisees to the provided mobile number(s). Messages & data rates may apply. Message frequency varies. View Terms and Privacy Policy. Reply STOP to opt out of future messages. Reply HELP for help.

By entering your email address, you agree to receive emails about services, updates or promotions, and you agree to the Terms and Privacy Policy. You may unsubscribe at any time.

How We Handle Electrical Panel Upgrades in Tempe, AZ

An electrical panel upgrade is not a single task. It's a full assessment of your electrical system, from the breaker box to the branch circuits feeding every room. Our Mesa electrician team starts with a power distribution inspection to identify overloaded circuits, outdated wiring, and insufficient capacity before touching a single breaker. Most Tempe homes built before 2000 were wired for 100-amp service. Modern electrical installations, including EV chargers, HVAC systems, and smart home devices, often require 200-amp service or more.

The upgrade process addresses several specific failure points in your electrical setup. Older breaker boxes with Federal Pacific or Zinsco panels create documented fire hazards because their circuit breakers fail to trip under overload conditions. Aluminum wiring replacement is often part of the scope of work in homes built between 1965 and 1973, since aluminum oxidizes at connections and raises resistance, which creates heat and safety risks. We also add expansion slots for circuit additions when your panel is already at capacity, giving your electrical grid room to grow with your home.

Electrical panel replacement goes beyond swapping hardware. We pull a permit when required, coordinate the utility disconnect, install the new panel to current safety codes, label every circuit, and test each one before we leave. The full job typically runs four to six hours for a standard residential electrical installation. Commercial electrical installation scopes vary based on load requirements and building type. Electrical service upgrades for home renovations or additions follow the same process but include a load calculation to confirm the new service size before ordering equipment.

Why Tempe Trusts Mr. Electric for Electrical Panel Upgrades

Our team brings comprehensive expertise to every electrical project. Our lead electrician is licensed, and every member of the team trains to the same safety standards and electrical codes that govern work in Maricopa County. We price every job by the scope of work, not by the hour, so you know your total cost before we start. That approach eliminates surprises and keeps your electrical project on schedule.

We operate as a locally owned electrical contractor backed by the Neighborly Done Right Promise^®. If the work is not done right, we make it right. Our service vehicles are stocked for the most common panel upgrades, which keeps response times short for Tempe, Mesa, Gilbert, and Chandler calls. Professional electricians on our team handle residential and commercial work, from a single wiring fix to a full service entrance replacement. Safety measures, safety requirements, and customer service are not afterthoughts here. They're built into every step of the process.

1235 S Gilbert Rd #21 Mesa, AZ 85204, United States

Services We Provide

Residential
Commercial

Frequently Asked Questions About Electrical Panel Upgrades: Tempe, AZ

Several signs point to a panel that's reached its limit. Flickering lights under normal load, circuit breakers that trip repeatedly without a clear cause, and outlets that feel warm to the touch all indicate stress on your electrical system. A breaker box that hums, buzzes, or shows visible discoloration around the terminals is a fire hazard that needs immediate attention. If your panel has no open slots and you're planning to add circuits for a car charging station, pool equipment, or a new appliance, an upgrade is the right move before that work begins. Our team inspects your panel and gives you a clear picture of what's needed.
Yes. The City of Tempe requires a permit for electrical panel replacement and electrical service upgrades. Permitted work gets inspected by the city, which confirms the installation meets current electrical codes and protects you if you sell the home. Skipping the permit is not worth the liability. We walk you through the process so there are no surprises on your end.
A standard residential panel upgrade in Tempe runs four to six hours from start to finish. That includes the utility disconnect, panel removal, new panel installation, circuit labeling, and final testing of every branch circuit. Your power will be off for most of that window. We schedule jobs with that in mind and give you a clear time estimate before we arrive. Larger scopes, such as a service entrance upgrade or a commercial project, take longer and are scheduled accordingly.
Our team handles the full range of residential electrical services in Tempe and the surrounding area. That includes surge protection installation, lighting repair, lighting installations, ceiling fan installation, under-cabinet lighting, and Lutron^® lighting control systems. We also install backup generators, including Generac units, and handle generator installation for both residential and commercial properties. EVSE installation for residential and commercial Level 2 EV charging is a growing part of our work as more Tempe households add a car charging station.
Yes. Aluminum wiring replacement is a common part of panel upgrade work in Tempe homes built during the 1960s and early 1970s. Aluminum wiring is not inherently dangerous when properly maintained, but it oxidizes at connection points over time. That oxidation increases resistance, generates heat, and raises the risk of electrical fires. We assess the extent of the aluminum wiring in your home, identify the highest-risk connections, and give you a clear scope of work. Addressing this during a panel upgrade is the most cost-effective time to do it.
Yes. Our team installs lighting control systems, including Lutron^® lighting control systems, LED lights, and energy-efficient options for both new and existing circuits. Smart home integrations, including smart switches, dimmers, and automated lighting fixtures, are part of our residential electrical installations work. If you're planning a home renovation and want to incorporate smart home features, we coordinate those electrical features into the panel upgrade scope so your new panel is sized correctly from the start.
Emergency electrical needs require fast action. If you smell burning near your breaker box, see sparking at an outlet, or lose power to part of your home without tripping a breaker, do not ignore it. Turn off the affected circuit if it's safe to do so, and call us immediately. Our team serves Tempe, Mesa, Gilbert, and Chandler with short response times for urgent electrical calls. We carry the materials for the most common emergency repairs on our service vehicles, so we're not making a second trip for parts.
Scheduling is straightforward. Call our office or book your appointment online to set up a time that works for you. We'll confirm the appointment, give you a clear scope of work and price before we start, and handle everything from the permit to the final inspection. Our team serves Tempe, Mesa, Gilbert, and Chandler for panel repair and replacement, power outage diagnosis, EVSE installation, surge protection installation, lighting repair, backup generator installation and service, panel upgrades, and the full range of residential electrical services. If you have questions before booking, our Mesa electrician team is ready to help.

Residential & Commercial Services

Residential
Commercial