How do I know if my panel needs repair or full replacement?

The panel usually tells you. Breakers that trip repeatedly under normal load, a burning smell near the box, discoloration on the cover, or a voltage problem affecting multiple circuits all point to an internal fault. A fuse box still in service in a home built before 1980 is a strong signal for replacement rather than repair. Our lead electrician inspects the full electrical system before recommending a path forward. In many cases, targeted panel repair resolves the issue. In others, the age and condition of the electrical components make replacement the safer long-term choice. We give you the honest assessment and a firm price for both options.

What causes circuit breakers to keep tripping?

A breaker trips when it detects more current than it is rated to carry. The three most common causes are an overloaded circuit, a short circuit in the wiring or a connected device, and a failing breaker that trips below its rated threshold. Faulty wiring, including outdated wiring with degraded insulation, increases the risk of nuisance trips and genuine faults. If your breakers are tripping regularly, electrical troubleshooting by an experienced electrician will identify whether the issue is in the panel, the branch circuit, or the load connected to it.

Do you handle power outages caused by panel problems?

Yes. A power outage in your home traced to the panel, rather than the utility, is something we diagnose and repair directly. Common panel-side causes include a failed main breaker, a blown bus bar connection, or blown circuits on a specific panel leg. We carry common electrical components on our service vehicles to handle most repairs in a single visit. If the outage involves the utility meter base or the service entrance, we coordinate with the utility as needed and handle the work on our side of the meter.

Can you install a surge protector at the panel level?

Yes. A whole-panel surge protector installs directly at the main panel and protects every circuit in your home simultaneously. This is a different product from a plug-in surge protector, which only protects individual outlets. Panel-level surge protection guards your electrical wiring, appliances, HVAC equipment, and smart home devices from voltage spikes caused by lightning, utility switching events, and large motor loads cycling on and off. We size the device to your panel's amperage and install it to UL 1449 standards.

What other electrical services do you offer in Tempe and the East Valley?

Beyond panel repair and replacement, we handle a wide range of residential electrical services. That includes GFCI outlet installation and testing, light switches, ceiling fan installation, smoke detectors, Carbon Monoxide Detector installation, landscape lighting, outdoor lighting and security lighting, LED fixture installation and home electrical inspections. For larger projects, we wire dedicated circuits for pools, AC units, ranges, and water heaters. We also install Generac whole home generator systems and Level 2 EVSE for residential and commercial property owners across Tempe, Mesa, Chandler, and Gilbert.

Does Mr. Electric pull permits for panel work in Tempe?

Permit requirements for electrical panel repair and panel replacement in Tempe are set by the City of Tempe Building Safety Division. Most panel replacements and upgrades require a permit and a city inspection. Our lead electrician is licensed in Arizona and handles the permit process when the scope of work requires it. In cases where a permit is not required, we still follow the NEC and local electrical codes to the letter. Every electrical installation we complete is built to pass inspection, whether or not an inspector is involved.

What should I do if I smell burning near my electrical panel?

Turn off the main breaker immediately and call an emergency electrician. A burning smell near the panel is a sign of an active electrical fire hazard, which includes arcing connections, overheated insulation, or a failing breaker. Do not attempt to open the panel yourself. This is not a safe DIY check. Once the main is off, the immediate risk is reduced, but the panel needs a full inspection before power is restored. Our team responds to emergency electrical needs in Tempe and across the East Valley, and we prioritize calls involving active safety concerns.

How do I schedule electrical panel repair in Tempe?

The fastest way to get on the schedule is to book an appointment online . You can also call our office directly. We serve Tempe, Mesa, Chandler, and Gilbert, and we offer same-day appointments for emergency electrical services when availability allows. Our Tempe electricians arrive with a fully stocked service vehicle, assess your panel on-site, and give you a firm quote before any work begins. Services include panel repair , panel replacement, panel upgrades , surge protection installation, EVSE installation , generator installation, lighting repair, power to pool equipment, power to AC units and water heaters, and residential electrical installations across the East Valley.

Electrical Panel Repair in Tempe, AZ

Your electric panel is the nerve center of your home's electrical system. When it fails, everything fails. If you're dealing with tripped breakers, a voltage problem, or a panel that simply can't keep up with modern power demands, the right call is a Tempe electrician with the training to diagnose it fast and fix it right. Mr. Electric of Mesa, Gilbert & Chandler has served Phoenix-area homes since 2000, and our lead electrician brings over 15 years of individual experience to every electrical panel repair job. We quote by the job, not by the hour, so you know the price before we touch a single electrical component.

Mr. Electric of Phoenix Metro electrician tools on a countertop in Phoenix, AZ.

Residential
Commercial

Book Online

First Name*

Last Name*

Email*

Phone Number*

Street Address**

ZIP/Postal Code*

Yes! You can text me service reminders and other messages.

By checking this box, I agree to opt in to receive automated informational and promotional SMS and/or MMS messages from Mr. Electric, a Neighborly company, and its franchisees to the provided mobile number(s). Messages & data rates may apply. Message frequency varies. View Terms and Privacy Policy. Reply STOP to opt out of future messages. Reply HELP for help.

By entering your email address, you agree to receive emails about services, updates or promotions, and you agree to the Terms and Privacy Policy. You may unsubscribe at any time.

What Electrical Panel Repair in Tempe Actually Involves

Electrical panel repair is not a single task. It covers a range of diagnostic and corrective work, and the scope depends on what your panel is telling us. A Mesa electrician from our team starts with a full assessment of the electrical layout, checking for blown circuits, faulty wiring, outdated wiring, frayed wires, and signs of an electrical fire hazard before any repair work begins. That process protects you and keeps every fix in line with local electrical codes and the NEC.

Here is what panel repair and related electrical repair services typically cover:

Electrical Panel Repair: Diagnosing and correcting faults inside the panel enclosure, including damaged bus bars, failing breakers, and loose connections that cause a short circuit or arc fault.
Electrical Panel Replacement: Full swap of an undersized or unsafe panel, including the meter base and all internal electrical components, brought up to Arizona electrical codes.
Electrical Panel Upgrades: Increasing amperage capacity (commonly from 100A to 200A) to meet the power demands of modern appliances, home offices, EV chargers, and HVAC systems.
Circuit Breakers: Replacing worn, tripping, or double-tapped breakers that compromise your electrical system's safety and reliability.
Fuse Box Conversion: Replacing an outdated fuse box with a modern breaker panel that meets current municipal and national electrical codes.
Surge Protection Installation: Adding a whole-panel surge protector to shield your electrical wiring and connected devices from voltage spikes.
Generator Installation: Connecting a Generac whole home generator with a transfer switch tied directly to your panel for automatic backup power.
EVSE Installation: Wiring a dedicated 240V circuit for residential and commercial Level 2 EV chargers, sized to NEC 625 requirements.
Residential Electrical Installations: Dedicated circuits for AC units, ranges, water heaters, and pool equipment, all permitted and inspected when required by the jurisdiction.
Lighting Repair and Replacement: Diagnosing and correcting faults in lighting circuits, including LED fixtures, outdoor lighting, and security lighting tied to the panel.

Every repair follows a documented electrical troubleshooting process. We test under load, verify torque specs on all lugs and connections, and confirm the panel is operating within rated capacity before we close it up.

Why Tempe Trusts Mr. Electric for Electrical Panel Repair

Electrical work in Tempe and across the East Valley follows both Arizona electrical codes and local and state regulations that go beyond the base NEC. Our lead electrician holds a valid Arizona license and understands how those local requirements affect panel work in Chandler, Gilbert, Mesa, and Tempe specifically. That matters on every electrical project, whether it's a straightforward breaker swap or a full panel replacement ahead of a home sale.

Our team applies consistent safety practices on every job. We pull permits when required by the jurisdiction or when they protect you, and we handle the inspection process from start to finish. Response times are a priority for us. Emergency electrical services and emergency electrical needs get same-day attention whenever our schedule allows, because a tripped main breaker or an active electrical fire hazard is not something you wait on. Customer care means showing up on time, explaining what we found, and giving you a firm price before the work starts.

The Done Right Promise^® backs every job. If the repair does not hold, we make it right. That is the Neighborly standard, and it is the standard we hold ourselves to in every home and commercial property we service across the East Valley.

1235 S Gilbert Rd #21 Mesa, AZ 85204, United States

Services We Provide

Residential
Commercial

Frequently Asked Questions About Electrical Panel Repair in Tempe

The panel usually tells you. Breakers that trip repeatedly under normal load, a burning smell near the box, discoloration on the cover, or a voltage problem affecting multiple circuits all point to an internal fault. A fuse box still in service in a home built before 1980 is a strong signal for replacement rather than repair. Our lead electrician inspects the full electrical system before recommending a path forward. In many cases, targeted panel repair resolves the issue. In others, the age and condition of the electrical components make replacement the safer long-term choice. We give you the honest assessment and a firm price for both options.
A breaker trips when it detects more current than it is rated to carry. The three most common causes are an overloaded circuit, a short circuit in the wiring or a connected device, and a failing breaker that trips below its rated threshold. Faulty wiring, including outdated wiring with degraded insulation, increases the risk of nuisance trips and genuine faults. If your breakers are tripping regularly, electrical troubleshooting by an experienced electrician will identify whether the issue is in the panel, the branch circuit, or the load connected to it.
Yes. A power outage in your home traced to the panel, rather than the utility, is something we diagnose and repair directly. Common panel-side causes include a failed main breaker, a blown bus bar connection, or blown circuits on a specific panel leg. We carry common electrical components on our service vehicles to handle most repairs in a single visit. If the outage involves the utility meter base or the service entrance, we coordinate with the utility as needed and handle the work on our side of the meter.
Yes. A whole-panel surge protector installs directly at the main panel and protects every circuit in your home simultaneously. This is a different product from a plug-in surge protector, which only protects individual outlets. Panel-level surge protection guards your electrical wiring, appliances, HVAC equipment, and smart home devices from voltage spikes caused by lightning, utility switching events, and large motor loads cycling on and off. We size the device to your panel's amperage and install it to UL 1449 standards.
Beyond panel repair and replacement, we handle a wide range of residential electrical services. That includes GFCI outlet installation and testing, light switches, ceiling fan installation, smoke detectors, Carbon Monoxide Detector installation, landscape lighting, outdoor lighting and security lighting, LED fixture installation and home electrical inspections. For larger projects, we wire dedicated circuits for pools, AC units, ranges, and water heaters. We also install Generac whole home generator systems and Level 2 EVSE for residential and commercial property owners across Tempe, Mesa, Chandler, and Gilbert.
Permit requirements for electrical panel repair and panel replacement in Tempe are set by the City of Tempe Building Safety Division. Most panel replacements and upgrades require a permit and a city inspection. Our lead electrician is licensed in Arizona and handles the permit process when the scope of work requires it. In cases where a permit is not required, we still follow the NEC and local electrical codes to the letter. Every electrical installation we complete is built to pass inspection, whether or not an inspector is involved.
Turn off the main breaker immediately and call an emergency electrician. A burning smell near the panel is a sign of an active electrical fire hazard, which includes arcing connections, overheated insulation, or a failing breaker. Do not attempt to open the panel yourself. This is not a safe DIY check. Once the main is off, the immediate risk is reduced, but the panel needs a full inspection before power is restored. Our team responds to emergency electrical needs in Tempe and across the East Valley, and we prioritize calls involving active safety concerns.
The fastest way to get on the schedule is to book an appointment online. You can also call our office directly. We serve Tempe, Mesa, Chandler, and Gilbert, and we offer same-day appointments for emergency electrical services when availability allows. Our Tempe electricians arrive with a fully stocked service vehicle, assess your panel on-site, and give you a firm quote before any work begins. Services include panel repair, panel replacement, panel upgrades, surge protection installation, EVSE installation, generator installation, lighting repair, power to pool equipment, power to AC units and water heaters, and residential electrical installations across the East Valley.