How do I tell if my Bryant home has a Federal Pacific or Zinsco panel?

Open the panel door and read the label inside. Federal Pacific panels say "FPE" or "Stab-Lok," and Zinsco panels often carry the Zinsco or GTE-Sylvania name with thin, multicolored breakers. Both brands went into homes through the 1970s, and the U.S. Consumer Product Safety Commission investigated Stab-Lok breakers after reports that they failed to trip. Don't remove the inner cover yourself. Snap a photo of the label and send it to us.

Do you need a permit for electrical work in Bryant?

Yes, for most work beyond swapping a device. Panel replacements, service upgrades, new circuits, and EV charger circuits inside city limits go through the City of Bryant's permits and inspections office, while unincorporated Saline County addresses follow county and state rules. An inspector signs off before the utility reconnects a new service. We file the permit, meet the inspector, and handle any corrections. Unpermitted work often surfaces during a home sale inspection, when fixing it costs more.

What should you check when power goes out in part of your house?

Start at the panel and look for a breaker sitting in the middle or off position, then reset it once. Next, press the reset button on GFCI outlets in the kitchen, bathrooms, garage, and exterior, since one tripped GFCI often kills several outlets downstream. Half the house is dark, and lights dim when appliances start, which points to a failed neutral at the meter or service drop. Call your utility, either Entergy Arkansas or First Electric Cooperative depending on your address, for anything on their side. Call us if the breaker trips again or you smell burning plastic.

What other electrical services do you offer in Bryant?

Our crew also handles projects that make your home easier to enjoy. October is a smart time to book permanent lighting installation , app-controlled roofline lights that cover Christmas and game days without a ladder. We install ceiling fans, landscape and patio lighting, smart doorbells, and security cameras. For hot tub circuits, the NEC requires a disconnect within sight of a hot tub and at least 5 feet from its inside wall, and we place it to meet that rule on the first inspection.

How do I schedule an electrician in Bryant?

Contact Mr. Electric of Little Rock to set a visit. Our team covers Bryant and the surrounding communities, including Little Rock and Mayflower. Nearby, find an electrician in Benton , Sherwood , Maumelle , and an electrician in North Little Rock . Every visit includes an upfront price, a uniformed electrician, and the Neighborly Done Right Promise®.

Licensed Electrician in Bryant, AR

Mr. Electric of Little Rock sends licensed electricians to homes across Bryant, AR for repairs, upgrades, and new installations. Bryant mixes older homes near the original town center with subdivisions built quickly during the 1990s and 2000s growth boom, and each has its own wiring quirks. Older homes often run on 100-amp panels and two-prong outlets. Newer builds tend to have builder-grade breakers now feeding central air, home offices, and EV chargers at once. You may notice warm outlets, flickering lights, or a breaker that trips when the dryer kicks on during a July heat wave. We find the cause, explain it plainly, and quote a flat price before work begins, with no hourly billing. As the Little Rock electrician serving Saline County, we pull required permits and test every circuit we touch before we leave. Call today to book a visit!

Residential
Commercial

Book Online

First Name*

Last Name*

Email*

Phone Number*

Street Address**

ZIP/Postal Code*

Yes! You can text me service reminders and other messages.

By checking this box, I agree to opt in to receive automated informational and promotional SMS and/or MMS messages from Mr. Electric, a Neighborly company, and its franchisees to the provided mobile number(s). Messages & data rates may apply. Message frequency varies. View Terms and Privacy Policy. Reply STOP to opt out of future messages. Reply HELP for help.

By entering your email address, you agree to receive emails about services, updates or promotions, and you agree to the Terms and Privacy Policy. You may unsubscribe at any time.

Electrical Services We Provide in Bryant, AR

Panel work makes up a large share of our Bryant calls. An electrical panel upgrade moves your home from 100 or 150 amps to 200-amp service, enough to carry central air, an electric range, and a Level 2 charger without constant trips. We replace the panel, breakers, and meter base as needed, then schedule the inspection. Some panels only need targeted electrical panel repair, such as a scorched bus connection or a breaker that no longer holds. Federal Pacific Stab-Lok and Zinsco panels are a different story. We recommend full replacement because their breakers have a history of failing to trip under overload.

Central Arkansas storms hit hard from March through June. Surge protector installation places a Type 2 device at your main panel to clamp voltage spikes before they reach your HVAC control board, refrigerator, and TVs. A plug-in strip guards one outlet. The panel unit covers every circuit. For outages, we handle generator installation wiring, including Generac standby units, transfer switches, and interlock kits for portable generators. We wire and connect them; we don't repair generator engines.

Safety and convenience upgrades round out most service visits. GFCI outlet installation protects kitchens, bathrooms, garages, laundry areas, and outdoor receptacles, as required by the National Electrical Code. For EV charger installation, our crew runs a dedicated 240-volt circuit, usually 40 or 50 amps, after a load check confirms your service has room. We also install light switches, including dimmers, smart switches, and lighted rockers that make a dark hallway safer at night.

Why Choose Mr. Electric for Your Bryant Home

Flat-rate pricing before any work begins

You see the full price before we start, and that number holds. We quote by the job, not the hour, so a stubborn wire pull through an old wall won't raise your bill. The quote lists parts, labor, permit fees, and cleanup. Approve it, and we get to work. Larger projects like a 200-amp service upgrade qualify for financing options, subject to credit approval.

Licensed electricians who test their work

Every electrician we send to Bryant holds an Arkansas license and works to the edition of the National Electrical Code adopted by the state. We check voltage, polarity, and grounding with calibrated testers, then torque terminations to the manufacturer's spec. That last step matters with aluminum branch wiring, found in roughly 2 million U.S. homes built between 1965 and 1973, because loose aluminum connections run hot. Our vans carry common panels, breakers, and wire, so we can finish most jobs in one trip.

Local ownership with national backing

Our office sits at 320 Executive Court in Little Rock, a short drive up I-30 from Bryant. Local ownership means the person accountable for your job lives and works in central Arkansas. Neighborly, the home services network behind Mr. Electric since 1994, adds training standards and the Neighborly Done Right Promise®. If the work isn't right, we come back and make it right.

320 Executive Court Suite 100 Little Rock, AR 72205, United States

Services We Provide

Residential
Commercial

Frequently Asked Questions About Electricians in Bryant, AR

Open the panel door and read the label inside. Federal Pacific panels say "FPE" or "Stab-Lok," and Zinsco panels often carry the Zinsco or GTE-Sylvania name with thin, multicolored breakers. Both brands went into homes through the 1970s, and the U.S. Consumer Product Safety Commission investigated Stab-Lok breakers after reports that they failed to trip. Don't remove the inner cover yourself. Snap a photo of the label and send it to us.
Yes, for most work beyond swapping a device. Panel replacements, service upgrades, new circuits, and EV charger circuits inside city limits go through the City of Bryant's permits and inspections office, while unincorporated Saline County addresses follow county and state rules. An inspector signs off before the utility reconnects a new service. We file the permit, meet the inspector, and handle any corrections. Unpermitted work often surfaces during a home sale inspection, when fixing it costs more.
Start at the panel and look for a breaker sitting in the middle or off position, then reset it once. Next, press the reset button on GFCI outlets in the kitchen, bathrooms, garage, and exterior, since one tripped GFCI often kills several outlets downstream. Half the house is dark, and lights dim when appliances start, which points to a failed neutral at the meter or service drop. Call your utility, either Entergy Arkansas or First Electric Cooperative depending on your address, for anything on their side. Call us if the breaker trips again or you smell burning plastic.
Our crew also handles projects that make your home easier to enjoy. October is a smart time to book permanent lighting installation, app-controlled roofline lights that cover Christmas and game days without a ladder. We install ceiling fans, landscape and patio lighting, smart doorbells, and security cameras. For hot tub circuits, the NEC requires a disconnect within sight of a hot tub and at least 5 feet from its inside wall, and we place it to meet that rule on the first inspection.
Contact Mr. Electric of Little Rock to set a visit. Our team covers Bryant and the surrounding communities, including Little Rock and Mayflower. Nearby, find an electrician in Benton, Sherwood, Maumelle, and an electrician in North Little Rock. Every visit includes an upfront price, a uniformed electrician, and the Neighborly Done Right Promise®.