How much does lighting installation cost in Taylors, SC?

Pricing depends on the number of fixtures, whether new wiring or circuits are needed, and the fixture type. A single fixture swap runs less than a full recessed lighting installation across multiple rooms. We price by the job, not by the hour, so you'll know the full cost before we start. Most homeowners in Taylors spend between $150 and $600 per fixture when labor and materials are bundled, with LED retrofit projects often falling on the lower end of that range.

Do I need a permit for lighting installation in Taylors?

Simple fixture-for-fixture replacements typically don't require a permit. New circuits, new junction boxes, or any work that changes the electrical layout does. South Carolina follows the National Electrical Code (NEC), and Greenville County requires permits for new wiring work. We pull permits for jobs that require them and schedule inspections so you don't have to coordinate with the county yourself.

What lighting options work best for older homes in Taylors?

Homes built before 1980 in the Taylors area often have wiring that was sized for far fewer fixtures and appliances than you're running today. We recommend starting with a load assessment before adding recessed lighting or a significant LED conversion. In many cases, a circuit addition cleanly handles the new load. If the panel is already near capacity, we'll flag that before quoting the lighting work. Taylors Mill and older Eastside neighborhoods frequently fall into this category.

How long does a typical lighting installation take in Taylors?

A single room with two to four recessed lights takes three to five hours, including wiring and switch work. Larger jobs spanning multiple rooms or requiring new circuits run a full day. Outdoor lighting projects with trenched low-voltage wiring add time depending on the yard layout. We give you a time estimate with your quote so you can plan accordingly.

What is the difference between recessed lighting and track lighting?

Recessed lights sit flush with the ceiling and cast light downward in a fixed direction. They work well for general room lighting and create a clean look. Track lighting mounts on the ceiling surface and uses adjustable heads that aim the light in different directions. Track setups are better for rooms where you want to highlight specific areas, like a kitchen island, artwork, or a workspace. Both are popular in Taylors homes, and we install and wire either type.

Can you install outdoor security lighting in Taylors?

Yes. We install motion sensor lights, dusk-to-dawn fixtures, and full-perimeter security lighting for homes throughout Taylors. Outdoor electrical work in South Carolina requires weatherproof junction boxes and GFCI-protected circuits within 6 feet of a water source, per NEC 210.8. We use corrosion-resistant fixtures and weather-shielded seals as standard on all exterior work, which matters given Taylors warm, humid summers. Security lighting is one of the most requested upgrades we see on Eastside properties.

Do you install smart lighting systems in Taylors?

We do. Smart lighting setups range from a single dimmable LED circuit tied to a smart switch to multi-zone systems with cloud connectivity and programmable schedules. If you're building out a home automation setup, we coordinate the electrical side so your smart automation hubs have clean, dedicated circuits to work from. We don't sell the smart devices, but we wire for them correctly so the system performs the way it's supposed to.

What other electrical services does Mr. Electric of Greer offer near Taylors?

Lighting is one of the things we handle. Our team also performs electrical panel upgrades , outlet and GFCI outlet installations , home generator installations , ceiling fan installations, circuit breaker replacements, dedicated circuit installations, EV charger installations, and home safety inspections. We serve residential and commercial properties in Taylors and the broader Greer area.

How do I schedule a lighting installation appointment in Taylors?

Call our team directly or schedule an appointment online . We'll confirm your service area, collect basic project information, and get you on the schedule. For jobs that require a site visit before a quote, we'll send a licensed electrician to assess the work and provide a written flat-rate estimate. Service appointments are available Monday through Saturday.

Lighting Installation in Taylors, SC

Enhance Your Home's Lighting With a Local, Licensed Team

Your home's lighting does more than flip on when you hit a switch. It shapes how every room feels, affects how safely your family moves through the house at night, and plays a direct role in your monthly energy bill. If your fixtures are outdated, your outdoor lights don't cover as much as they should, or you've been considering recessed lighting or LED retrofits in Taylors, this is the page for you. Our Taylors electricians handle everything from a single fixture swap to a full-home lighting plan, and every job gets a flat-rate quote before we touch a wire.

Enhance Your Home's Lighting With a Local, Licensed Team

Residential
Commercial

Book Online

First Name*

Last Name*

Email*

Phone Number*

Street Address**

ZIP/Postal Code*

Yes! You can text me service reminders and other messages.

By checking this box, I agree to opt in to receive automated informational and promotional SMS and/or MMS messages from Mr. Electric, a Neighborly company, and its franchisees to the provided mobile number(s). Messages & data rates may apply. Message frequency varies. View Terms and Privacy Policy. Reply STOP to opt out of future messages. Reply HELP for help.

By entering your email address, you agree to receive emails about services, updates or promotions, and you agree to the Terms and Privacy Policy. You may unsubscribe at any time.

Expert Lighting Installation Taylors, SC Can Depend On

When our Greer electrician team shows up at a Taylors home, we come prepared for the full range of lighting work. That matters because many lighting jobs become more involved once the old fixture comes down. Wiring that's undersized, a junction box that won't support the new fixture's weight, or a breaker that's already at capacity are all things we catch and handle on the spot. You won't get halfway through the job and get told we need to reschedule.

Here's what we install and service across Taylors and the surrounding areas:

Recessed lighting: We cut in new cans, run the wiring, and tie into your existing circuits or add a dedicated circuit when the load requires it.
LED retrofits and conversions: Swap fluorescent or incandescent fixtures for LED systems. Most retrofits cut lighting energy draw by 60 to 75 percent.
Outdoor and landscape lighting: Low-voltage landscape lighting, security lights with motion sensors, and corrosion-resistant fixtures sized for South Carolina's humidity and summer heat.
Ceiling fan installation: Includes new wiring and switch work when a fan is going where no ceiling box exists.
Under-cabinet and task lighting: Hard-wired options that don't depend on an outlet or a tangle of cords.
Track lighting: Ideal for living rooms, kitchens, and home offices where adjustable directional light beats a fixed fixture.
Smart lighting systems: Dimmable LED systems tied to smart automation hubs, including single-room zones and whole-home setups.

Homes in Taylors near Taylors Mill and throughout the Eastside often have a mix of older wiring and updated additions, which means lighting upgrades often require a panel upgrade to handle the added load. We check capacity before we quote.

Why Taylors Homeowners Call Mr. Electric of Greer

Our electricians average 20 years of hands-on experience, which makes a real difference on jobs that look straightforward but aren't. Taylors has a range of housing stock, from mid-century homes with aluminum wiring to newer builds with pre-run but never-finished junction boxes. Knowing what you're dealing with before you start saves time and avoids callbacks.

Every job we do is backed by the Neighborly Done Right Promise®. If the work isn't right, we make it right. You get a written, flat-rate quote before anything is scheduled, so there are no hourly surprises at the end of the day. Our service vehicles are stocked for most residential lighting jobs, so we don't make multiple trips to a supplier while you wait at home.

We serve Greer, Taylors, Inman, Duncan, Campobello, Wellford, and the communities in between. If you've been putting off a lighting project because you weren't sure who to call, the team at Mr. Electric of Greer is the answer.

309 W Pointsett St Suite 5 Greer, SC 29650, United States

Services We Provide

Residential
Commercial

Frequently Asked Questions About Lighting Installation: Taylors, SC

Pricing depends on the number of fixtures, whether new wiring or circuits are needed, and the fixture type. A single fixture swap runs less than a full recessed lighting installation across multiple rooms. We price by the job, not by the hour, so you'll know the full cost before we start. Most homeowners in Taylors spend between $150 and $600 per fixture when labor and materials are bundled, with LED retrofit projects often falling on the lower end of that range.
Simple fixture-for-fixture replacements typically don't require a permit. New circuits, new junction boxes, or any work that changes the electrical layout does. South Carolina follows the National Electrical Code (NEC), and Greenville County requires permits for new wiring work. We pull permits for jobs that require them and schedule inspections so you don't have to coordinate with the county yourself.
Homes built before 1980 in the Taylors area often have wiring that was sized for far fewer fixtures and appliances than you're running today. We recommend starting with a load assessment before adding recessed lighting or a significant LED conversion. In many cases, a circuit addition cleanly handles the new load. If the panel is already near capacity, we'll flag that before quoting the lighting work. Taylors Mill and older Eastside neighborhoods frequently fall into this category.
A single room with two to four recessed lights takes three to five hours, including wiring and switch work. Larger jobs spanning multiple rooms or requiring new circuits run a full day. Outdoor lighting projects with trenched low-voltage wiring add time depending on the yard layout. We give you a time estimate with your quote so you can plan accordingly.
Recessed lights sit flush with the ceiling and cast light downward in a fixed direction. They work well for general room lighting and create a clean look. Track lighting mounts on the ceiling surface and uses adjustable heads that aim the light in different directions. Track setups are better for rooms where you want to highlight specific areas, like a kitchen island, artwork, or a workspace. Both are popular in Taylors homes, and we install and wire either type.
Yes. We install motion sensor lights, dusk-to-dawn fixtures, and full-perimeter security lighting for homes throughout Taylors. Outdoor electrical work in South Carolina requires weatherproof junction boxes and GFCI-protected circuits within 6 feet of a water source, per NEC 210.8. We use corrosion-resistant fixtures and weather-shielded seals as standard on all exterior work, which matters given Taylors warm, humid summers. Security lighting is one of the most requested upgrades we see on Eastside properties.
We do. Smart lighting setups range from a single dimmable LED circuit tied to a smart switch to multi-zone systems with cloud connectivity and programmable schedules. If you're building out a home automation setup, we coordinate the electrical side so your smart automation hubs have clean, dedicated circuits to work from. We don't sell the smart devices, but we wire for them correctly so the system performs the way it's supposed to.
Lighting is one of the things we handle. Our team also performs electrical panel upgrades, outlet and GFCI outlet installations, home generator installations, ceiling fan installations, circuit breaker replacements, dedicated circuit installations, EV charger installations, and home safety inspections. We serve residential and commercial properties in Taylors and the broader Greer area.
Call our team directly or schedule an appointment online. We'll confirm your service area, collect basic project information, and get you on the schedule. For jobs that require a site visit before a quote, we'll send a licensed electrician to assess the work and provide a written flat-rate estimate. Service appointments are available Monday through Saturday.