How much does an outdoor lighting installation cost in Greensboro?

Pricing depends on how many fixtures you're adding, whether new circuits need to be run, and what type of lighting you're installing. A basic path lighting job using low-voltage LED along a front walkway will cost considerably less than a full exterior project that includes security lighting, landscape uplights, and new circuits. We provide written estimates before any work begins, so you know exactly what you're looking at before you commit.

Do I need a permit for outdoor lighting installation in Greensboro?

Most exterior lighting projects involving low-voltage landscape fixtures don't require a permit. Line-voltage work, new circuit runs, and panel additions generally do fall under permit requirements in Greensboro. Our electricians pull the required permits when they're needed. You don't have to navigate that process on your own.

What's the difference between low-voltage and line-voltage outdoor lighting?

Low-voltage systems (typically 12V) run through a transformer plugged into a standard outlet and are the most common choice for landscape and path lighting. They're safe to work around, easy to adjust, and LED low-voltage fixtures are very efficient. Line-voltage systems run at 120V and are used for security floodlights, exterior wall fixtures, porch lights, and any fixture that needs full power output. Some outdoor projects use both, depending on what's being installed and where.

Can you replace just a few failing fixtures, or does it have to be a full project?

Single fixture replacements are something we handle all the time. If you've got one security light that's corroded out or a path light that keeps failing, there's no requirement to redo the whole system. That said, if your existing system is running on older wiring or hardware that's starting to fail across the board, it usually makes more sense to address it comprehensively rather than chase individual failures one at a time.

Do you install smart outdoor lighting?

Yes. We can install smart switches, motion sensors, and app-controlled lighting controls as part of an outdoor lighting project. These tie into your home's Wi-Fi and let you manage lighting schedules, motion triggers, and on/off control from your phone. It's an easier add-on during a new installation than a retrofit job later.

Will outdoor lighting installation work with my existing electrical panel?

Most homes have adequate capacity for standard outdoor lighting additions. If you're adding a significant number of line-voltage fixtures or large floodlights, our electricians will check panel capacity as part of the estimate. If a new circuit is needed, we include that work in the project. We also install whole home surge protectors, which are worth considering any time you're adding outdoor electronics.

What steps should I take to book my outdoor lighting estimate with Mr. Electric of Greensboro?

To get started on an outdoor lighting service with Mr. Electric of Greensboro, request a service online or contact us . An electrician will come to your property, take a look at the areas you want lit, ask a few questions about how you use the space, and put together a written estimate for the work. In addition to outdoor lighting, we also provide services for panel repairs , wiring installations , generator installation , surge protection , and more.

Outdoor Lighting Installation in Greensboro, NC

A yard that goes dark at sunset isn't doing much for your home. Good outdoor lighting extends the usable hours of your outdoor spaces, makes your property safer, and adds real curb appeal whether you're hosting a backyard dinner or just pulling into the driveway after a late night. Mr. Electric of Greensboro installs outdoor lighting for homeowners across Greensboro. Our Greensboro electricians handle everything from low-voltage LED landscape lighting along your front walkway to floodlighting along the rear of your property and security lighting at garage doors and entry points. Call us today to get started.

Residential
Commercial

Book Online

First Name*

Last Name*

Email*

Phone Number*

Street Address**

ZIP/Postal Code*

Yes! You can text me service reminders and other messages.

By checking this box, I agree to opt in to receive automated informational and promotional SMS and/or MMS messages from Mr. Electric, a Neighborly company, and its franchisees to the provided mobile number(s). Messages & data rates may apply. Message frequency varies. View Terms and Privacy Policy. Reply STOP to opt out of future messages. Reply HELP for help.

By entering your email address, you agree to receive emails about services, updates or promotions, and you agree to the Terms and Privacy Policy. You may unsubscribe at any time.

What We Install for Greensboro Homeowners

Path lighting is one of the most practical outdoor upgrades a homeowner can make. A well-lit walkway from the driveway to the front door isn't just about looks. We install path lights, uplights, downlights, and accent fixtures for homeowners across Greensboro. If you're replacing an older system that's been failing, or you're starting fresh on a recently landscaped yard, we can put together a layout that matches the look you're going for without overloading your outdoor circuits.
We install motion-activated floodlights, dusk-to-dawn fixtures, and security lighting at entry points, garages, and outbuildings for homeowners in Greensboro. For homeowners who want more control, we also install smart security lighting that connects to a phone app or a home automation system so you can check status, set schedules, or trigger lights remotely. It's a straightforward add-on when the wiring is already being run, and it's worth asking about if you're going through a full exterior lighting project.
We handle exterior fixture installation for front porch lights, garage sconces, post lights at the end of driveways, and decorative fixtures along fences and garden walls. If you're upgrading from dated builder-grade fixtures that have been on the house since it was built, swapping those out for something current is one of the easiest ways to update how your home presents from the street.

Why Choose Mr. Electric of Greensboro for Outdoor Lighting

We handle the full scope of outdoor lighting installation, from low-voltage LED landscape systems to line-voltage security floodlights and exterior fixtures. If your circuits need upgrading or a dedicated circuit has to be run for the new load, that wiring work is included in the project. You won't be coordinating two separate contractors or waiting on a second visit to wrap things up.

Every installation uses weatherproof-rated fixtures and wiring methods built for exterior exposure. Junction boxes, conduit, and fixture housings all meet the IP ratings for damp or wet locations depending on where they're going. North Carolina gets real weather, and the hardware we put in is rated for it.

We're also licensed electricians in North Carolina, so all of our work is done to code, and we pull permits when the job requires them. You're not taking on that paperwork.

Before any work starts, one of our electricians comes out, looks at the property, and talks through what makes sense given your yard layout, your panel capacity, and what you're trying to accomplish. If you're planning outdoor construction, it's worth getting us involved early. Running conduit through a finished patio is a much bigger job than routing it before the pavers go down.

For homeowners who want smart controls, we tie outdoor zones into timer-based switches, photo-cell sensors, or app-controlled smart switches during installation. It's a simple add during the original job and a lot more work as a retrofit later.

Mr. Electric of Greensboro serves homeowners throughout Greensboro, High Point, Jamestown, Oak Ridge, Summerfield, Browns Summit, Whitsett, Pleasant Garden, Stokesdale, Sedalia, McLeansville, and Climax.

Frequently Asked Questions About an Outdoor Lighting Installation in Greensboro

Pricing depends on how many fixtures you're adding, whether new circuits need to be run, and what type of lighting you're installing. A basic path lighting job using low-voltage LED along a front walkway will cost considerably less than a full exterior project that includes security lighting, landscape uplights, and new circuits. We provide written estimates before any work begins, so you know exactly what you're looking at before you commit.
Most exterior lighting projects involving low-voltage landscape fixtures don't require a permit. Line-voltage work, new circuit runs, and panel additions generally do fall under permit requirements in Greensboro. Our electricians pull the required permits when they're needed. You don't have to navigate that process on your own.
Low-voltage systems (typically 12V) run through a transformer plugged into a standard outlet and are the most common choice for landscape and path lighting. They're safe to work around, easy to adjust, and LED low-voltage fixtures are very efficient. Line-voltage systems run at 120V and are used for security floodlights, exterior wall fixtures, porch lights, and any fixture that needs full power output. Some outdoor projects use both, depending on what's being installed and where.
Single fixture replacements are something we handle all the time. If you've got one security light that's corroded out or a path light that keeps failing, there's no requirement to redo the whole system. That said, if your existing system is running on older wiring or hardware that's starting to fail across the board, it usually makes more sense to address it comprehensively rather than chase individual failures one at a time.
Yes. We can install smart switches, motion sensors, and app-controlled lighting controls as part of an outdoor lighting project. These tie into your home's Wi-Fi and let you manage lighting schedules, motion triggers, and on/off control from your phone. It's an easier add-on during a new installation than a retrofit job later.
Most homes have adequate capacity for standard outdoor lighting additions. If you're adding a significant number of line-voltage fixtures or large floodlights, our electricians will check panel capacity as part of the estimate. If a new circuit is needed, we include that work in the project. We also install whole home surge protectors, which are worth considering any time you're adding outdoor electronics.
To get started on an outdoor lighting service with Mr. Electric of Greensboro, request a service online or contact us. An electrician will come to your property, take a look at the areas you want lit, ask a few questions about how you use the space, and put together a written estimate for the work. In addition to outdoor lighting, we also provide services for panel repairs, wiring installations, generator installation, surge protection, and more.

Outdoor Lighting Installation in Greensboro, NC

Book Online

What We Install for Greensboro Homeowners

Why Choose Mr. Electric of Greensboro for Outdoor Lighting

Frequently Asked Questions About an Outdoor Lighting Installation in Greensboro

Residential & Commercial Services

Electrical Safety

Repair

Installations

Lighting