I can see ceramic knobs and tubes in my attic; are they a fire risk?

An old knob and tube wiring system can still be in your home, but disconnected after replacement with modern electrical wiring. Call us to have an electrical safety inspection done, and we can help you make further decisions from there.

Do I need to have a disconnected knob and tube wiring removed?

Knob and tube wiring left behind after a home was required typically isn’t a hazard on its own. However, it causes undue clutter, which is why at Mr. Electric of Coeur D’Alene , we remove and dispose of the old system when we perform knob and tube wiring replacement.

I’ve got knob and tube wiring, and everything works fine; why fix what’s not broken?

Active knob and tube wiring is a hazard in almost every situation, unless you can guarantee it’s never been tampered with or circumvented, and you don’t use any newer appliances (such as a microwave, dishwasher, or laundry appliances). In addition, you may not be able to get home insurance, and home contractors may refuse to work on your home. When you’re ready, contact us for more information about knob and tube wiring replacement.

Is there a way to tell if my home has knob and tube wiring without tearing into the walls or ceiling?

Visual confirmation is best, but a red flag that you might have knob and tube wiring is the absence of grounded (GFCI) outlets in a home built before the 1940s. If you don’t have GFCI outlets, you should have your system checked by a licensed electrician; you may need new wiring, an electrical panel upgrade , plus new outlets.

Is knob and tube wiring replacement expensive?

The cost to require a home varies based on multiple factors: how big the house is, how accessible the wiring is, and how many outlets, switches, and hardwired components (like lights) you have. Schedule an appointment for an accurate quote.

Knob and Tube Wiring in Coeur d'Alene

Up until the 1940s, knob and tube wiring was considered the best way to wire a home. Ceramic knobs could be easily nailed to joists, wire fed through the knobs, and matching ceramic tubes used to protect the exposed wires.

However, this type of wiring predates the common use of heavy home appliances like microwaves, washers, dryers, dishwashers, and HVAC systems. Additionally, many knob and tube wiring systems have been repeatedly repaired and even circumvented, rendering them even more of a hazard.

Quite a few homes have had knob and tube wiring replacement, but owners find remnants of previous systems still in place. If you have found ceramic knobs and tubes, and don’t know if they are active or not, don’t touch them and call Mr. Electric of Coeur D’Alene. We can quickly confirm whether or not the system is still in use and offer a firm quote for knob and tube wiring replacement. Contact us today.

Residential
Commercial

Book Online

First Name*

Last Name*

Email*

Phone Number*

Street Address**

ZIP/Postal Code*

Yes! You can text me service reminders and other messages.

By checking this box, I agree to opt in to receive automated informational and promotional SMS and/or MMS messages from Mr. Electric, a Neighborly company, and its franchisees to the provided mobile number(s). Messages & data rates may apply. Message frequency varies. View Terms and Privacy Policy. Reply STOP to opt out of future messages. Reply HELP for help.

By entering your email address, you agree to receive emails about services, updates or promotions, and you agree to the Terms and Privacy Policy. You may unsubscribe at any time.

Why Knob and Tube Wiring Should Be Replaced

With knob and tube wiring, there’s no ground wire. This means the system isn’t built to accept electrical plugs with three prongs. Outlets should never be adapted to accept three-prong plugs (GFCI), as forcing this adaptation can mean an electrical surge can short out your appliance, shock you, or even start a fire.
Appliances and HVAC systems in demand by today’s homeowner can dangerously overload knob and tube wiring systems. You’d either have to do without modern conveniences or circumvent safety issues and run the risk of shorting your system and/or causing a fire if you lived with knob and tube wiring.
Although not illegal, knob and tube wiring poses such a risk for misuse and overload that many insurers refuse to supply coverage for such homes or severely limit losses due to fire. Exposed wires, insulation around knob and tube wiring, and past tampering all increase your risk.

Choose Mr. Electric for Knob and Tube Wiring Replacement

Have you noticed old knob and tube wiring in your home? Don’t panic. There’s every chance that it’s inactive, and if not, we have the solution. Call Mr. Electric of Coeur D’Alene to inspect your electrical wiring and ensure you aren’t at undue risk for fire or other damage to your home or property. If you do have an active old system and need knob and tube wiring replacement, we will:

Give you a solid quote based on the job, not an hourly rate
Have all work done by local, licensed electricians you can trust
Follow all regulations and comply with all safety codes
Adhere to the Neighborly Done Right Promise®

Don’t delay having a knob and tube wiring issue looked at and addressed. Call Mr. Electric today and schedule an appointment.

Easy Online Booking

Residential & Commercial Services

Areas We Serve in Coeur D Alene

695 W Capstone Ct Hayden, ID 83835, United States

Mr. Electric of Coeur D’Alene proudly serves homeowners and businesses throughout Coeur D’Alene, ID and the surrounding communities. No matter where you are located, you can count on the same professional service, upfront pricing, and quality workmanship on every job.

Frequently Asked Questions about Knob and Tube Wiring

An old knob and tube wiring system can still be in your home, but disconnected after replacement with modern electrical wiring. Call us to have an electrical safety inspection done, and we can help you make further decisions from there.
Knob and tube wiring left behind after a home was required typically isn’t a hazard on its own. However, it causes undue clutter, which is why at Mr. Electric of Coeur D’Alene, we remove and dispose of the old system when we perform knob and tube wiring replacement.
Active knob and tube wiring is a hazard in almost every situation, unless you can guarantee it’s never been tampered with or circumvented, and you don’t use any newer appliances (such as a microwave, dishwasher, or laundry appliances). In addition, you may not be able to get home insurance, and home contractors may refuse to work on your home. When you’re ready, contact us for more information about knob and tube wiring replacement.
Visual confirmation is best, but a red flag that you might have knob and tube wiring is the absence of grounded (GFCI) outlets in a home built before the 1940s. If you don’t have GFCI outlets, you should have your system checked by a licensed electrician; you may need new wiring, an electrical panel upgrade, plus new outlets.
The cost to require a home varies based on multiple factors: how big the house is, how accessible the wiring is, and how many outlets, switches, and hardwired components (like lights) you have. Schedule an appointment for an accurate quote.

Residential
Commercial

Book Online

First Name*

Last Name*

Email*

Phone Number*

Street Address**

ZIP/Postal Code*

Yes! You can text me service reminders and other messages.

By entering your email address, you agree to receive emails about services, updates or promotions, and you agree to the Terms and Privacy Policy. You may unsubscribe at any time.

Knob and Tube Wiring in Coeur d'Alene

Book Online

Why Knob and Tube Wiring Should Be Replaced

Choose Mr. Electric for Knob and Tube Wiring Replacement

Residential & Commercial Services

Electrical Safety

Repair

Installations

Lighting

Areas We Serve in Coeur D Alene

Frequently Asked Questions about Knob and Tube Wiring

Book Online