How do I know if my Woodway home needs a panel upgrade?

The signs indicating you need a panel upgrade in Woodway, TX include: Breakers trip under a normal load Lights dimming or flickering Panel is warm to the touch Panel has less than 200 amps You have outdated equipment If you experience any of these electrical issues in your home, be sure to reach out to our electricians for an inspection.

How long does a panel replacement take in Woodway?

Most single-family panel replacements take four to six hours. Your power will be off for the duration of the work. We confirm the window with you before scheduling so you can plan around it. If additional work is needed, like replacing deteriorated service entrance cable or adding circuits, the timeline extends, and we walk you through that estimate separately before proceeding.

What's the difference between a panel upgrade and a panel replacement?

A panel upgrade typically means increasing the service amperage, most often from 100 to 200 amps, while keeping the panel in the same location. A full replacement means removing the existing enclosure, breakers, and bus work entirely and installing new equipment. In practice, most panel upgrades in older Woodway homes also involve a full replacement because the existing equipment doesn't have the slots or the bus capacity to accommodate higher amperage without starting fresh. We'll tell you clearly which applies before writing the estimate.

What other electrical services does Mr. Electric of Waco offer in the Woodway area?

Beyond panel upgrades and replacements, we handle EV charger installation, whole-home surge protection, generator hookups and transfer switches, service rebuilds, circuit additions for renovations, ceiling fan installation, dedicated appliance circuits, and general diagnostic work for outlets, switches, and lighting throughout Woodway, Robinson, Hewitt, and the broader Waco area. If your home has a specific electrical issue, our electricians carry the diagnostic equipment and parts to address most residential problems in a single visit.

Is a 200-amp service enough for a Woodway home with an EV charger and a generator?

For most single-family homes in Woodway, 200-amp service handles standard household load, a Level 2 EV charger (typically 32 to 48 amps), and a generator interlock. The key is proper load calculation and circuit sizing, not just raw amperage. A home with two EVs, a large HVAC system, an electric range, and a standby generator pulling 7,500 watts may benefit from a 400-amp service or a load management device.

How do Central Texas storms affect electrical panels in Woodway?

The severe thunderstorm pattern across Central Texas, which runs roughly from March through October, brings lightning strikes and voltage surges that can damage breakers, fuses, and service equipment. A whole-home surge protector installed at the panel is the most effective single addition for protecting against this. Storm season in Central Texas is a practical annual trigger to have a licensed electrician look at your service equipment, and Mr. Electric of Waco covers Woodway and the surrounding area year-round. Schedule an appointment to get a written estimate or book an inspection today, backed by the Neighborly Done Right Promise ® .

Electrical Panel Upgrade in Woodway, TX

Your electrical panel is the core of your home's power system. If it's undersized, outdated, or running gear it wasn't designed for, you'll notice a range of electrical issues in your home. In Woodway, where newer homes sit alongside properties built in the 1970s and 1980s, the gap between what a panel was sized for and what a household actually draws today is often significant. Mr. Electric of Waco handles panel upgrades and full panel replacements for Woodway electricians working across Woodway and the surrounding area. Our licensed electricians pull the required permits, work to NEC and Texas electrical code standards, and give you a written estimate before touching a single wire.

Mr. Electric electrician showing circuit breaker board to two people.

Residential
Commercial

Book Online

First Name*

Last Name*

Email*

Phone Number*

Street Address**

ZIP/Postal Code*

Yes! You can text me service reminders and other messages.

By checking this box, I agree to opt in to receive automated informational and promotional SMS and/or MMS messages from Mr. Electric, a Neighborly company, and its franchisees to the provided mobile number(s). Messages & data rates may apply. Message frequency varies. View Terms and Privacy Policy. Reply STOP to opt out of future messages. Reply HELP for help.

By entering your email address, you agree to receive emails about services, updates or promotions, and you agree to the Terms and Privacy Policy. You may unsubscribe at any time.

What an Electrical Panel Upgrade Includes in Woodway

Replacing or upgrading a panel isn't just swapping one box for another. The scope depends on your current service amperage, the condition of the existing wiring, and what you're adding to the system. Most Woodway homes our Waco electricians work on fall into one of three scenarios.

The first is a straight capacity upgrade. A 100-amp service gets replaced with a 200-amp service, which is the current standard for most residential homes and is required by many utility providers when service is touched. This covers the new panel, updated breakers, and a full load calculation to confirm the new service handles your current and planned draw.

The second scenario involves older panels with known safety issues. The most notorious are Federal Pacific Stab-Lok panels and Zinsco panels, which can still be found across several homes in Central Texas. These breakers are documented to fail to trip under overload conditions, which is a fire risk. Replacement here isn't optional if you're insuring the home or selling it. We remove the old equipment completely and install a current-code panel with properly rated breakers.

The third is a combination upgrade and addition. This is recommended for when you're installing a Level 2 EV charger, new circuits for a home addition, or dedicated lines for high-draw appliances. We size the new panel for both current load and planned additions, so you're not calling us back in two years for another upgrade.

Why Choose Mr. Electric When You Need an Electrical Panel Upgrade in Woodway, TX?

As a locally owned and operated business, Mr. Electric of Waco is well-versed in the electrical challenges homeowners face in the area, especially when it comes to outdated electrical panels. Each of our electricians is fully licensed and completes each service to the current code. You won’t have to worry about being blindsided by costs; we offer upfront pricing so you know exactly what to expect before work begins. We have a strong commitment to customer satisfaction and strive to go above and beyond to ensure that every job is completed to your standards. Contact us today to get started on your electrical panel upgrade or replacement in Woodway, TX.

Areas We Serve

927 Enterprise Boulevard Hewitt, TX 76643, United States

Services We Provide

Residential
Commercial

Frequently Asked Questions About Electrical Panel Upgrades in Woodway, TX

The signs indicating you need a panel upgrade in Woodway, TX include:
- Breakers trip under a normal load
- Lights dimming or flickering
- Panel is warm to the touch
- Panel has less than 200 amps
- You have outdated equipment
If you experience any of these electrical issues in your home, be sure to reach out to our electricians for an inspection.
Most single-family panel replacements take four to six hours. Your power will be off for the duration of the work. We confirm the window with you before scheduling so you can plan around it. If additional work is needed, like replacing deteriorated service entrance cable or adding circuits, the timeline extends, and we walk you through that estimate separately before proceeding.
A panel upgrade typically means increasing the service amperage, most often from 100 to 200 amps, while keeping the panel in the same location. A full replacement means removing the existing enclosure, breakers, and bus work entirely and installing new equipment. In practice, most panel upgrades in older Woodway homes also involve a full replacement because the existing equipment doesn't have the slots or the bus capacity to accommodate higher amperage without starting fresh. We'll tell you clearly which applies before writing the estimate.
Beyond panel upgrades and replacements, we handle EV charger installation, whole-home surge protection, generator hookups and transfer switches, service rebuilds, circuit additions for renovations, ceiling fan installation, dedicated appliance circuits, and general diagnostic work for outlets, switches, and lighting throughout Woodway, Robinson, Hewitt, and the broader Waco area. If your home has a specific electrical issue, our electricians carry the diagnostic equipment and parts to address most residential problems in a single visit.
For most single-family homes in Woodway, 200-amp service handles standard household load, a Level 2 EV charger (typically 32 to 48 amps), and a generator interlock. The key is proper load calculation and circuit sizing, not just raw amperage. A home with two EVs, a large HVAC system, an electric range, and a standby generator pulling 7,500 watts may benefit from a 400-amp service or a load management device.
The severe thunderstorm pattern across Central Texas, which runs roughly from March through October, brings lightning strikes and voltage surges that can damage breakers, fuses, and service equipment. A whole-home surge protector installed at the panel is the most effective single addition for protecting against this. Storm season in Central Texas is a practical annual trigger to have a licensed electrician look at your service equipment, and Mr. Electric of Waco covers Woodway and the surrounding area year-round. Schedule an appointment to get a written estimate or book an inspection today, backed by the Neighborly Done Right Promise^®.

Residential & Commercial Services

Residential
Commercial