Briggs & Stratton Home Page Home Standby Systems
Home Briggs & Stratton Difference How to Select a System Product Comparison
12kw



Remember! to add the right Transfer Switch to your Standby System.




12kW Automatic Home Standby System

Product Overview | Features and Specifications | 10kW | Transfer Switches


Model 1815 / CHGEN12000
  • Permanently installed to your home’s electrical system.
  • Fully automatic operation - without even being home!
  • Preventative maintenance and service support available.
  • Works with the following Automatic Transfer Switches:
Model 1917 / CHGEN50ATS 50 amp Automatic (Nema 1)
Model 1918 / CHGEN50ATSR 50 amp Automatic (Nema 3R)
Model 1813 / CHGEN100ATSR 100 amp Automatic (Nema 3)
Model 1814 / CHGEN200ATSR 200 amp Automatic (Nema 3)

* Model numbers listed Briggs & Stratton Power Products/Eaton Cutler-Hammer

Features
Generator
Industrial 627cc Briggs & Stratton Vanguard™ V-Twin OHV Engine OHV Commercial quality engine delivers increased engine life, improved fuel efficiency and reduced noise
Natural Gas or Liquid Propane Powered Provides long-lasting uninterrupted power
Extra Quiet Operation Automotive-type muffler and sound absorbing panels keep noise to low levels (70 dB at 7 meters)
Service Convenience Four panels easily remove for access in all directions
Brushless Alternator Provides clean and efficient power
Run-Time Meter Helps to maintain regular maintenance intervals
Battery Charger Keeps battery automatically charged at all times to ensure starting
Built-in Diagnostic Center Alerts you to any possible problems with the generator
7 Day Exerciser Runs generator for 20 minutes once every 7 days to keep system in top operating condition
Polymer Installation Pad Eliminates the need for a poured concrete slab
Specifications
Generator
Rated Watts 12,000 Watts (LP), 11,000 Watts (NG)
Surge Watts 15,000 Watts (LP), 13,750 Watts (NG)
Voltage 120/240V AC, single phase, 1.0 pf
Amps 100/50
Engine Industrial 627cc OHV Briggs & Stratton Vanguard™ V-Twin
Engine Type Overhead Valve
Starting Method Automatic
Fuel Consumption Specified in installation manual
Diagnostic Control Center Alerts
  • Low battery voltage
  • Low oil pressure
  • Low voltage
  • Engine fail to start
  • Low frequency
  • Engine overspeed
  • Oil temperature high
Auto/Off/Manual Switch Yes
Overcrank Protection Yes
Engine Warm-Up/Cool-Down 10 seconds/1 minute
Dimensions 40" L x 22" W x 23" H
Weight 379 Lbs.




Overview | Briggs & Stratton Difference | How to Select a System | Comparison

Copyright©2003 Briggs & Stratton Power Products Group LLC.    Privacy Statement | Terms & Conditions
900 North Parkway P.O. Box 239 Jefferson, WI 53549